Turbojet
Joined:
Feb 2002
Connellsville, Pa. USA
|
|
I got my mufflers, now I can't find anybody that does mandrel bend exhaust. There are more muffler shops here then I thought, BUT nobody mandrel bends. I live in SW Pa., anybody around my area know of any shops that does mandrel bends? Thanks for any info.
The Family:
86
87
88
|
martin0660
Joined:
Jun 2002
Greensburg, PA
|
|
Your pretty much out of luck around here. I've looked into it, and not found anybody to do it either.
I used a mandrel bent 2 1/2" Mustang cat back on some of my previous cars, and have the ATR single 3" on my current 88.
Bob Myers
|
Red_LX
Joined:
Dec 2002
Morgantown, WV
|
|
I've never known of any run-of-the-mill muffler or exhaust shop that did mandrel bends. Mostly because mandrel bending machines are EXPENSIVE and for 99.9% of those guys' customers, it doesn't really make a difference. But the nice thing is you can usually buy a lot of things that are already mandrel bent.
Garrett Hunt
Moderator, 2.3L & Turbos Forum @ forums.stangnet.com
'87 Thunderbird Turbo Coupe
Windage tray, crank scraper, P&P head, RR, ARP head studs, P&P intakes, 60mm TB, Accel AFPR, Bob's log, T3, big FMIC, blow-thru VAM, Forge BOV, 3" exhaust, UPR shifter, gauges, etc.
My Turbo Coupe
|