North American Turbocoupe Organization



knock sensor dilema....
RJS6677 Offline
Junior Member
#1
Can anyone tell me what color the knock sensor plug is?There are two plugs side by side,one is grey the other is black.They are taped around each other,someone must have played with this wiring before because the protective plastic is cut which is supposed to surround the wires...
Reply

Pete D Offline
Administrator
#2
Are they currently connected to anything? The KS itself is the one closer to your face as you lean over to look at the backside of the lower intake where both the KS and the ACT reside
Pete Dunham


Reply

RJS6677 Offline
Junior Member
#3
Both plugs are still connected. I cant tell what one is closer to my face though,because they are both wire tied and taped to each other..Thats why i hoped i would be able to tell by the color of the plug itself...
Reply

Pete D Offline
Administrator
#4
On my 88, both connectors look black. However the ACT has a purple wire going to it and the KS has a yellow wire going to it
Pete Dunham


Reply

RJS6677 Offline
Junior Member
#5
ok,so i thought i figured out which plug it was...It had alot less wires in it than the other,and it had a bright yellow,but when i disconnected it i noticed i lost my oil pressure guage?Plugged it back in & its ok??Guess i still havnt been able to locate this knock sensor??lol
Reply

Pete D Offline
Administrator
#6
Take a look at this:
http://www.turbotbird.com/FAQpage/engine.jpg
Pete Dunham


Reply

RJS6677 Offline
Junior Member
#7
I finally found it!Now htf do i unplug it?It looks like its going to be difficult to get at?Thankx for the help.
Reply

Pete D Offline
Administrator
#8
Just gently lift the clamp and back it off.
Pete Dunham


Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB