#1 |
WHEW! Just got back from a roadtest. K member is in...but...found MORE damage! Lookin from umderneath up past the fuel lines to where the steering comes thru the firewall where the rubber plug is and the firewall is stamped I found a wrinkle. It took a little prying to get the Kmember to bolt up with 1 of the rear mount bolts not lining up on each side...will have to enlarge the hole in the K member. Had a little trouble aligning the drivers side fender and it has a slight bulge up about midway down along the top. Will run it down to work tomorrow and attempt to align it...We Shall See! If its real close then I'll continue to drive it if not I'll pull the motor and put the big valve head on it and stick it in the "street/strip" car!
Garry McVey "BIRDS OF A FEATHER" TBird TC owners are usually wingin' it
TC's 83 project, 86 donor for 83, 86 FUN street car daily driver with speed equipment from Red 88 donor, 87 blue to be stock street car, 87 red donor for blue and others, 87 red donor, 88 street and strip(now a donor) 14.01 chasin 13.0's, 87 XR4ti project,
TC's 83 project, 86 donor for 83, 86 FUN street car daily driver with speed equipment from Red 88 donor, 87 blue to be stock street car, 87 red donor for blue and others, 87 red donor, 88 street and strip(now a donor) 14.01 chasin 13.0's, 87 XR4ti project,