North American Turbocoupe Organization



Integrated Controller Module
Entropy1988 Offline
Junior Member
#1
Trying to find where this is located?  Is this on the right front fender near the strut?
Reply

Jeff K Offline
Administrator
#2
Rectangular black box roughly around 6" x 6" x 2" with a 30 pin electrical connector mounted via a bracket to the front of the pass side strut tower. The BARO sensor is mounted on opposite side of the the same bracket.
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

Entropy1988 Offline
Junior Member
#3
Thanks for your help. Apparently that box contains the fuel pump relay and relays for the cooling fans etc. I checked the inertia switch, its good so I'm thinking relay, fuse or ground because the fuel pump is new. According to the electrical trouble shooting guide the fuel pump is grounded at g208. I'm trying to locate that ground. 

2 other things I noticed, parking lights don't work and neither do the brake lights work.  I have to check those fuses as well first.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB