Qwertys
Joined:
Mar 2004
California
|
|
on my 85, which uses a 1G alternator, thepulley seems to be shredding the shaft. i can see metal shaving and the pulley seems a little loose. and clue as to the cause? did i tighten the belt too much?
well, sinde it seems its gonna die (too bad after i put in the 95A upgrade kit), how do i upgrate to a 3G?
the article on the site seems to be mostly talking about the 87-88, where mine is an 85 and has a completely different alt bracket. will the 3g just drop in?
what does the external regulator look like?
I already replaced the main wire with a nice 8ga wire to the starter solonoid, so i just need to remove the external regulator and wire in the 3g harness?
and what do you guys think about the ebay alts, i found one brand new 160 amp for like 150$ sometimes i'll see a 200 amp one for that price. too risky?
'85 TC BPV and Ford FMIC
'88 TC Kirban AFPR, Autometer Boost, FP and A/R Gauge, 8.8 to 4.10 rear, Walboro 255lph Fuel pump, Garrett GT3071R T3/T4 Dual Ball bearing Turbo, Custom AWIC.
|
karnage
Joined:
Mar 2003
Olympia, WA.
|
|
I did mine with the 130 amp 3G to my 84 TC.Yours will be the same as mine.I gutted the harness from the alt back to the regulator.I saved the green wire to the regulator as this is needed to switch the alt on and off.Its a simple swap.I would get the alt from pa-performance.com and they also have the proper wire harness as well.I ran 6 gauge cable from the alt to the solenoid, the yellow wire from the new harness goes to the big post on the alt for voltage sensing.The green wire goes to the greem wire on the car.The white wire just plugs into the alt itself.Pretty easy and clean install.I also took the existing 10 gauge black wire(orange stripe) that went to the alt for charging and just ran it to the solenoid post.Also to get all the proper
wire ends go to www.madelectrical.com
They have the good stuff.Talk to Marc.
84 TC with 88 hood LA-3 full 3" exhaust Rods header ported/polished big valve head schneider roller cam RW adj cam gear Kirban gillis at 20 # boost MSD ignition 255 lph Walbro full gauges
17 inch centerlines 944 front mount IC 80mm MAF
65mm tb-rotated intake on the way to 400HP
|
Qwertys
Joined:
Mar 2004
California
|
|
i cant even locate anything i need to under the bundle of wires. i hope i cut the right ones.
'85 TC BPV and Ford FMIC
'88 TC Kirban AFPR, Autometer Boost, FP and A/R Gauge, 8.8 to 4.10 rear, Walboro 255lph Fuel pump, Garrett GT3071R T3/T4 Dual Ball bearing Turbo, Custom AWIC.
|
Asimov
Joined:
Jan 2005
East Tennessee, US
|
|
Quote:Originally posted by Qwertys:
i cant even locate anything i need to under the bundle of wires. i hope i cut the right ones.
famous last words...
-asi
1986 TC, 132k pretty well taken care of miles. k&n, gillis@16, timing @ 12 (spout out), A/C delete. 3" Downpipe (no other exhaust... Whoever described that sound as a "pissed off tractor" hit the nail on the head)
[email pics to asimov at forced-induction org for sales/id/showoff purposes (free hosting)]
|
Qwertys
Joined:
Mar 2004
California
|
|
so what about this one: http://cgi.ebay.com/ebaymotors/ws/eBayIS...ename=WDVW
are they knockoffs? should i trust something like this?
'85 TC BPV and Ford FMIC
'88 TC Kirban AFPR, Autometer Boost, FP and A/R Gauge, 8.8 to 4.10 rear, Walboro 255lph Fuel pump, Garrett GT3071R T3/T4 Dual Ball bearing Turbo, Custom AWIC.
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
No idea if that eBay alt is good or not. Personally, I would just get a 3G from PA Performance. 100% new, using quality parts. They come with a lifetime guarantee, which you wont ned to use anyway, as they seem to last forever.
------------------
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 21 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 04 Taurus Duratec (wifes car)
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
|
Pa Performance IS the way to go. They are great people to deal with, and offer a lifetime warrenty (which was mentioned), and will clock the connectors which ever way you want them to. i actually happened to have a problem with mine about a year or two after getting it, and they shipped me one to use until they fixed mine, and then shipped mine back, and i then used the same box to send the loaner back. The only reason they did that was because i have a polished one, i really didn't expect them to give me a loaner, and honestly i kept the loaner way to long because i had alot going on and didnt have time to change the alt out, and they were cool with that......they got my future business....
-88 TC Black
5spd, Precision SC50 T3/T4, QH/SD Tune, Gillis, AFPR, 255FP, WB O2, K&N, Ported E6, 3" DP, ATR 2.5" Duals, 3:73 Rear, Konis, Eibachs, 18" Voxx Wheels, X Drilled Rotors.
-06 G35 Coupe Diamond Graphite
-97 Pathfinder
|
Qwertys
Joined:
Mar 2004
California
|
|
couldn't wait, bought the alt from kragen. got the harness from the dealer.
the old IVR was easy to remove. it only had 2 wires that were needed. voltage sense and key on power. the third one was the stator which isnt needed because its on the new IVR.
no modification of the bracket is necessary.
in all an easy install, and the lights no longer dim at idle. [Image: smile.gif]
'85 TC BPV and Ford FMIC
'88 TC Kirban AFPR, Autometer Boost, FP and A/R Gauge, 8.8 to 4.10 rear, Walboro 255lph Fuel pump, Garrett GT3071R T3/T4 Dual Ball bearing Turbo, Custom AWIC.
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
Quote:are they knockoffs? should i trust something like this?
Would you buy a pacemaker off Ebay? [Image: tongue.gif]
Pete Dunham
|
Qwertys
Joined:
Mar 2004
California
|
|
Yea i got the autolite from kragen. lifetime warrenty, ect ect...
good luck finding a pulley at any parts store. since the 85 has dual pulley instead of the single like the 88, it was impossible to find a replacement even from the dealer.
'85 TC BPV and Ford FMIC
'88 TC Kirban AFPR, Autometer Boost, FP and A/R Gauge, 8.8 to 4.10 rear, Walboro 255lph Fuel pump, Garrett GT3071R T3/T4 Dual Ball bearing Turbo, Custom AWIC.
|
|