North American Turbocoupe Organization



I'm looking for part #s for coolant lines around engine
matt f Offline
Member
#1
For example, the one that goes from the oil cooler to the lower intake, the one from the hard line to the oil cooler, etc.

I've found heater hose part #s, but nothing pre formed.

I'm looking to replace every small hose that can nickel and dime us during a race.

Thanks,

Matt
Ricky Bobby's Laughing Clown Malt Liquor" 88 Turbo Coupe'
2010 LeMons: 21st @ Capitol Offense, 17th @ Detroit Bull Oil Grand Prix.
Up in flames NJMP 2011
It's heart will beat again in an 87 Mustang!
2- 87 TCs, 1 88 TC, future race and support vehicles
Reply

Pete D Offline
Administrator
#2
These are already posted in this forum.
http://natomessageboard.com/cgi-bin/ulti...086#000000

http://natomessageboard.com/cgi-bin/ulti...022#000000

You will probably have to just use regular hose of the right diameter for the oil cooler to lower intake. The pre-formed one MAY?? not be available.
Pete Dunham


Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB