t-bird88
|
Joined:
Feb 2005
East of Stillwater, Ok, USA (for now)
|
|
11-06-2019, 08:54 PM
Been looking everywhere for a new power steering hose, the high pressure side. Mine blew out due to rubbing on the fender well. I tried to patch the metal line with a compression fitting, but it blows it apart everytime the wheel is turned. I have looked up on the parts stores websites all the way to Rock Auto, and no one has this hose. My hose has only one bend in the metal part of the line, the ones everyone else shows has 3 bends in the metal part of the line. So thus it brings me to my question, what part number inter change with our tbirds on the power steering hose? What other car/truck has the single bend hose? Thanks in advance.
Jim B  .
Gunmetal Grey 88 TC!!!!
|
Jeff K
|
Joined:
Apr 2001
Milwaukee, WI
|
|
I got one from Rock Auto this past spring. I think it was around $25 or so. Been working fine since. Also replaced the PS return line with the correct part from RA while I had everything apart.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
RC Martin
|
Joined:
Mar 2006
Colorado
|
|
Same, I was able to get both whole new lines relatively cheap on Rockauto within 2 years ago. Perfect fits.
Thunderbird Turbo Coupe, Bright Canyon Red TuTone, Desert Tan Interior; 1 of 7 in this combo in 1984 according to Marti. 1 of 13,361 TCs in 84.
Rebuilt, 3-Angle Valve Job, SYB37 "OE/Small" Slider Cam
Full 3" Stinger Exhaust to Flowmaster 40, Gnari FMIC/Recirc/BPV, MBC @ 18psi, RF-E6 Manifold, Remote-Mount TFI, PC1 and Flowed 35# Injectors, Inline Walboro 255HP, Kirban AFPR
Rebuilt Suspension -- KYB & Energy Suspension
|
