North American Turbocoupe Organization



Getting reproduction 1988 rear-window rubber molding
Masejoer Offline
Junior Member
#1
I've started dialog with steelerubber.com in getting reproduction single-piece rear-window molding made up. I'll start pulling it from all the cars I find in local yards, but there's only a handful appearing each year now. Does anyone have some reasonable-condition (still pliable, not hard plastic, cracked or torn) molding on hand, or that can be pulled from a parts vehicle? Would love to get some reproductions going, if Steele analyzes an intact part and can start manufacturing.

The only source I've found for these in recent years is a non-refundable $2600 for a full new rear window, installed, coming with the rubber piece. Only one shop has given me that quote - everyone else can't find/get the parts, full glass or not.
Reply

Masejoer Offline
Junior Member
#2
Actually just found a NOS one after looking for years - shocking on the timing. Will call Steele in the morning to discuss getting it sent to them.
Reply

Masejoer Offline
Junior Member
#3
Quote:“Our other Thunderbird parts of this era do not sell well.  To the point we did some recent pricing reductions in an effort to gain some positive movement on Thunderbird items.  That said we would not be interested in reproducing this rear window molding”.


Their other products aren't exactly the heavier wear items. Fender/hood rubber is only replaced if a fender is pulled, and likely still pliable. Door seal rubber doesn't have UV exposure. Some others can use general weather stripping (trunk, cowl to hood, etc).

We'd need to generate some real interest (initial group buy?) before we'd be able to get new rubber moldings. Please post a realistic price point that you guys would be willing to pay for new moldings of the rear window single-piece trim on the 1988 Thunderbird (I believe it would also fit on 1987 vehicles with the metal trim, if someone would prefer a swap to the cleaner look). Perhaps we can get enough interest over the next year to make it financially viable for Steele to make reproductions.

Keep in mind that a repaint of the car would also likely need a new rear window molding. The old piece may not be removable without damage. A paint job really should have the trim removed though, not just masked around. Years ago I masked around it, and it would look much better had I just removed the molding.

Would you buy one or more at $100/each + shipping?
$200 + shipping?
$500 + shipping?
Reply

Entropy1988 Offline
Junior Member
#4
I would be interested in buying several rear window moldings for a reasonable price. Please keep me in the loop.
Reply

Jeff K Offline
Administrator
#5
I would pay $200 maximum. $500...... NO WAY
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

Masejoer Offline
Junior Member
#6
Lack of major interest, Steele Rubber will have no incentive to offer these anytime soon.

I did manage to finally find both a nos rear window molding, and a full new rear window with molding included (now installed), so I'm set as long as I properly maintain them with water-base silicone, and store my spare appropriately. This is still something that someone will likely reman sometime down the road, but I don't see it being Steele. We need more people in it more for the full restoration and prices associated with that, rather than the general mindset since the 90's of these being beater cars.

It's difficult in that only some of a single model year had this piece.
Mikey97D likes this post
Reply

Mikey97D Offline
Senior Member
#7
Masejoer, thank you for trying to get this done.
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.   
Reply

brokenbirdy Offline
Junior Member
#8
$100/each + shipping
Reply

w60 Offline
Senior Member
#9
200 + shipping
http://www.mycoachonline.com
White 88 TC Auto Trans
White 04 Honda CR/V
Blue 74 Honda Trail 70
Reply

seshore Offline
Junior Member
#10
How many did Steele say you had to buy to get them to reproduce them? What does the windshield use? A gasket or glue?
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB