North American Turbocoupe Organization

Gauge pod to fit in dash
Golden Bird Offline
I am looking to replace the equalizer in my 1987 turbo with a 3 gauge pod does any one know the part number that is a fit ?

Golden Bird

Not B Anymore Offline
Any single DIN gauge panel should work. Glowshift has one for $13

Attached Files Image(s)
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels

Jeff K Offline
I just made my own out of 1/8" plexiglass and made brackets to attach it to the original mounting points for the equalizer. Roughed up the plexiglass a little with 180 grit sandpaper and painted it flat black. This way I was able to set the gauge panel back 3/4" or so, so the gauges didnt stick out of the dash. Glued black felt around the panel to hide the gap between the gauge panel and the dash panel. I also put holes for 4 indicator LEDs for various functions in the panel.
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized

ridgeback Offline
would love to see a pic of that fab Jeff.

Black 87 TC, 2nd owner since 1990@21k, now@109k.
Current Mods: Gillis valve @18psi. K&N Cone. Removed AC components, New: Esslinger Aux. Shaft, Seals, Melling Oil Pump, Heater core. Ranger cam & rollers, new tower bearings, Walbro 255 fuel pump

BJL Offline
i just slotted the factory cubby hole thing and popped the gauges in there.
Brian Larkin
88TC 330,000 miles
Slightly Modified

Users browsing this thread:
1 Guest(s)

Theme © iAndrew 2018 - Software MyBB