|
|
|
|
Sal
Junior Member
|
Where is the fan relay location?
The electric fans are good they're are just not coming on.
thanks
?
|
Not B Anymore
|
Joined:
Apr 2001
Nokesville, VA, USA
|
|
What year? - '87-'88 it/they are part of the IRCM. Pre-'87 it's behind the glove box.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
|
|
|
|
Sal
Junior Member
|
IRCM? What's that?
Yes I know, I'm a noob.
?
|
Pete D
|
Joined:
Apr 2001
Northern OH
|
|
It's the black box on the pass side fender with a big connector going to it. Has 5 relays in it. 2 for the fans, 1 for computer power, 1 for the fuel pump and the last for the AC clutch IIRC
There is an article in the tech articles on repair.
Might want to pull the codes first and see what codes you get.
Pete Dunham
|
Jeff K
|
Joined:
Apr 2001
Milwaukee, WI
|
|
+1 on running codes. During KOEO test, fan operation is tested, and if the test fails, you will get a fan code.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
