|
04-02-2014, 04:55 PM
(This post was last modified: 04-02-2014, 04:55 PM by ianbfromct.)
Does anyone know if we can still get the factory oil cooler hoses. The hoses that are connected to the cooler underneath the oil filter. I think they are supposed to be formed and im sure I can manage some universal hoses but I would rather the right ones so they dont kink. Also my buddy with a Svo used plain ole hoses said it was a major PITA to put in.
88 5 speed TC
-3" DP,lowered, 255 Walbro, Gillis valve, Cobra R's, bondo/rust, Stinger's PIMP Ecu
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
04-02-2014, 07:49 PM
(This post was last modified: 04-04-2014, 02:22 AM by Pete D.)
NAPA part #s 9807 and 7296 for preformed 90* hoses.
7296 measures approx. 2 1/2" X 3 3/4"
9807 measures approx. 4 1/2" X 6 1/2"
Pete Dunham
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
Just get some random 5/8" ID 90 deg bent heater hoses from the parts store and cut them down to length. I dont use oil resistant hose, but then again my TC doesnt leak oil.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|