North American Turbocoupe Organization



exhaust manifold replacement
turbotronic Offline
Senior Member
#1
I did do a search and didn't find what I needed to know. I apologize if someone does find what I need to know via search.

I am wanting to replace my exhaust manifold (E6) with 40Bob's manifold. It doesn't have the studs in it. How do I go about removing them from the e6 and putting them on Bob's header?
~Mark

88 TC (Black), 5 speed
FMS 140MPH Speedo Big Grin
Oval Port Head
1.59/1.89 SS Valves
APC Cone (I know...Ricer part)
Gillis valve
TurboXS BOV-RFL
Alum. Water Pump
Walbro 190
3G

88 TC (Red) [Parts Car]
Reply

Matt S Offline
Posting Freak
#2
The stock E6 has bolts on it, not studs. Are you referring the bolt with a stud for the intercooler bracket as studs? Bob's Log comes with hex bolts. I cut of a little of the first hole on his header and re-used the bolt/stud for the intercooler bracket.
hope that helps.
Sold it Sad*
Reply

turbotronic Offline
Senior Member
#3
The header I have has nothing on it. I got it from someone other than Bob himself. Here is a pic of it:

http://natomessageboard.com/uploads/0000...header.JPG
~Mark

88 TC (Black), 5 speed
FMS 140MPH Speedo Big Grin
Oval Port Head
1.59/1.89 SS Valves
APC Cone (I know...Ricer part)
Gillis valve
TurboXS BOV-RFL
Alum. Water Pump
Walbro 190
3G

88 TC (Red) [Parts Car]
Reply

natmac3 Offline
Administrator
#4
http://natomessageboard.com/ultimatebb.p...1;t=001680

Look at the 4th post down for lenght info on the bolts.

--n8
1987tc
Reply

natmac3 Offline
Administrator
#5
http://natomessageboard.com/ultimatebb.p...1;t=001680

Look at the 4th post down for length info on the bolts.

--n8
1987tc
Reply

turbotronic Offline
Senior Member
#6
Oops, ya double posted. Thanks though. Can I not use what's on the E6 for the header?
~Mark

88 TC (Black), 5 speed
FMS 140MPH Speedo Big Grin
Oval Port Head
1.59/1.89 SS Valves
APC Cone (I know...Ricer part)
Gillis valve
TurboXS BOV-RFL
Alum. Water Pump
Walbro 190
3G

88 TC (Red) [Parts Car]
Reply

Matt S Offline
Posting Freak
#7
some of the original bolts would be too short unless you grind/cut of a portion of the "tube" on bob's header they go through. I had to do this to reuse the intercooler bracket bolt.
Sold it Sad*
Reply

40bob Offline
Member
#8
Turbotronic, your talking about the studs to hold the turbo to the header I think. If so send me your addy if you haven't found some already.

bob
Reply

turbotronic Offline
Senior Member
#9
Quote:Originally posted by 40bob:
Turbotronic, your talking about the studs to hold the turbo to the header I think. If so send me your addy if you haven't found some already.

bob
Yes. PM Sent.
~Mark

88 TC (Black), 5 speed
FMS 140MPH Speedo Big Grin
Oval Port Head
1.59/1.89 SS Valves
APC Cone (I know...Ricer part)
Gillis valve
TurboXS BOV-RFL
Alum. Water Pump
Walbro 190
3G

88 TC (Red) [Parts Car]
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB