North American Turbocoupe Organization



enertia switch? how to disconnect it?
qmakowski Offline
Member
#1
how do you disconnect the enertia switch? do you just try to unplug it or do ihave to unbolt it from the car?
Reply

qmakowski Offline
Member
#2
ahhh where is the damn enteria switch! i cant find it!!!!!
Reply

Jeff K Online
Administrator
#3
What year car? If it is an 87-88, it is located at the rear, attached to the bulkhead the tail lights are mounted to. You have to remove the trunk liner panel to see it. You can unbolt it from under the car. If the car is 83-86, it is above the pas side wheel well in the trunk.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 02 Taurus Vulcan(wifes car)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

karnage Offline
Member
#4
If it's tripped then push it in.To bypass it just jumper it so it makes a complete connection.
84 TC with 88 hood LA-3 full 3" exhaust Rods header ported/polished big valve head schneider roller cam RW adj cam gear Kirban gillis at 20 # boost MSD ignition 255 lph Walbro full gauges
17 inch centerlines 944 front mount IC 80mm MAF
65mm tb-rotated intake on the way to 400HP
Reply

qmakowski Offline
Member
#5
thanks, found it, replaced the fuel filter, all is well again... except for the trans, read my other post
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB