North American Turbocoupe Organization



EEC and IRC schematic and pin outs
nohandle Offline
Junior Member
#1
I found a VERY good schematic of the EEC and IRC with the pinouts.
http://www.therangerstation.com/tech_lib...wiring.pdf
87 TC that is very STOCK yet will melt the pavement.....
Reply

Joe F Offline
Posting Freak
#2
Also see HERE or HERE for a complete IRCM schematic rather than just a functional block diagram of it.

HTH
JR's Place - My '87 Turbocoupe
Reply

TurboE Offline
Posting Freak
#3
Thanks thats awesome I could of used that when I converted to a MAP sensor, but I had the EEC pinout, but the rest of the wiring diagram is nice to have! For some reason my car doesnt have the self test connector, or sti or at least I can't find it (not original owner), i will have to see if it was cut off or hidden but at least now I can make my own with this diagram.
-88 TC Black
5spd, Precision SC50 T3/T4, QH/SD Tune, Gillis, AFPR, 255FP, WB O2, K&N, Ported E6, 3" DP, ATR 2.5" Duals, 3:73 Rear, Konis, Eibachs, 18" Voxx Wheels, X Drilled Rotors.
-06 G35 Coupe Diamond Graphite
-97 Pathfinder
Reply

Pete D Offline
Administrator
#4
http://natomessageboard.com/uploads/0000...IPlug1.jpg
Pete Dunham


Reply

TurboE Offline
Posting Freak
#5
Thanks Pete, I've had a turbo coupe before that had them, although this one doesn't. It's almost like someone cut them off or moved them around. I was always working on something else so maybe I just didn't feel like wasting anymore time looking but it wasn't obvious like they normally are to find...? I'll have to look into it more.
-88 TC Black
5spd, Precision SC50 T3/T4, QH/SD Tune, Gillis, AFPR, 255FP, WB O2, K&N, Ported E6, 3" DP, ATR 2.5" Duals, 3:73 Rear, Konis, Eibachs, 18" Voxx Wheels, X Drilled Rotors.
-06 G35 Coupe Diamond Graphite
-97 Pathfinder
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB