Distributor position at TDC...

I'm finishing up the install of my rebuilt motor. [Image: smile.gif]

Does this look correct for the dist at TDC??

Thanks!

------------------
Nick Johnson
87'TC- Getting a fresh shortblock + header + intercooler...Woohoo!!
88'TC- Distributor gear sitting in the oil pan in pieces
"Educating Columbus, Ohio about the Turbocoupe; One stoplight at a time"

That tong thing on the rotor should point at the #1 runner on the lower intake manifold. Take a more angled pic so we can see the rotor & lower intake.

Bill

that & it should be at the #1 wire/ make sure you can rotate the dist back and forth without hitting any obstacles!!!

When it's all said and done this is the position you want it to end up in