North American Turbocoupe Organization



could it be this simple?
83zombi Offline
Senior Member
#1
Installing a gillis boost valve in my 83. I can't find any of those pesky things that are mentioned in the instructions like bost control solenoed and air pressure wastegate actuator. Could it be as simple as just putting it between the wastegate and turbo?
83 dead bird, in pieces however I'm reading from the book of the dead, should be running soon.
Reply

turbo83coupe Offline
Member
#2
I am assuming that this is an original TC and not an 83 with a TC swapped into it. On my 83, it was just as simple as putting a line in between the wastegate and the turbo with a boost valve in the middle. I know that the gilles on my 88 had to run up to the vacuum tree from the wastegate. It came factory like this and ran about 9.5# stock. Hope this helps.

Frank M.
Reply

Chuck W Offline
Posting Freak
#3
Yes...it's that simple
83 TC Clone, 80 Cougar XR-7, 85 Volvo 244 Turbo, AND 88 Scorpio
Reply

83zombi Offline
Senior Member
#4
At last, something I can do.
83 dead bird, in pieces however I'm reading from the book of the dead, should be running soon.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB