Not B Anymore
Joined:
Apr 2001
Nokesville, VA, USA
|
|
Does anyone know whether the Luk 07038 clutch kit is 8.875" or 9.25"?
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
T`s ol fords
Joined:
Nov 2014
Florida, U.S.A.
|
|
brian,i can`t tell you the size but i will tell you i purchased a clutch kit-flywheel,pressure plate,disc,and slave cylinder for a 2005 mustang 4.0 litre and everything as a package was under $300.00 and i bought it thru amazon. everything was a-1 and made the replacement easy as pie. not having to resurface the flywheel made it a very quick job!!
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
See questions and answers at bottom. Don't know whether to believe it or not??
http://www.amazon.com/dp/B000CI8XH2/?tag...othes4c-20
Get hold of BJL. He reports having a LUK in his 87 driver in 4/12
This place says 8-7/8" but says it for an 86 TC, same P/N for an 88
http://catalog.schaeffler-aftermarket.us...L&qualfier=
Pete Dunham
|
anasazi4st
Joined:
Feb 2015
Phoenix, AZ
|
|
When I replaced my clutch assembly a couple of months ago, I went with a PowerTorque kit from O'Reilly's. It was around $100 with a lifetime warranty (NAPA'S is only 1 year), and included release and pilot bearings.
AND, it was...9".
Another proud dues-paying member.
1987 Turbo Coupe w/T5OD, 8.8 axle, grey smoke; most options. Got it in 1991 with 41K miles: 3 turbos, 2 heater cores, 3 T5OD full rebuilds, 6 clutches, 1 head gasket, 2 Teves II ABS units, etc. later....
|
Not B Anymore
Joined:
Apr 2001
Nokesville, VA, USA
|
|
Thanks, fellas. I guess I'll probably get that one from RockAuto. We don't have O'Reilly's here. This is for a stock car anyways so I'm not too concerned with holding power.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
anasazi4st
Joined:
Feb 2015
Phoenix, AZ
|
|
My TC is stock as well. I'm not promoting O'Reilly's...but I was very surprised how much "beefier"--more heavy duty, sturdier and better put together--theirs was over the NAPA one I had in there.
Here's some pictures. If it's not obvious, the NAPA one is dirtier and has wear on the pressure plate disc. The O'Reilly's one has bigger/sturdier rivets, thicker gauge metal...and the pressure plate disc is about a quarter inch thicker than the NAPA one.
https://www.dropbox.com/sh/26kf42s3irsyn...sduXa?dl=0
Another proud dues-paying member.
1987 Turbo Coupe w/T5OD, 8.8 axle, grey smoke; most options. Got it in 1991 with 41K miles: 3 turbos, 2 heater cores, 3 T5OD full rebuilds, 6 clutches, 1 head gasket, 2 Teves II ABS units, etc. later....
|