North American Turbocoupe Organization

Junior Member
ok i fixed the abs with a new/used brake accumulator now, new problem developed yesterday.after about a 5mile drive on he high way i roll to a stop at a stop sign and the car wont go into gear, the clutch isnt disengageing all the way, i then have to pump the clutch pedal a few times before the clutch will fully disengage?? what do you guys think it could be? air in the system or failing slave cyl??
thanks in advance
88tc ac delete, flowmaster exhaust fluidyne radiatior, gillis,

Joe F Offline
Posting Freak
Or low fluid level/leak.

Joe F.
JR's Aerie - Our 3 TC's
JR's Place - My '87 Turbocoupe

Pete D Offline
Carefully peel back the rubber boot on the slave cylinder. A little moisture (hyd fluid) is OK. If it's dripping the slave is shot, and needs replaced. Like Joe said check the resevoir first. If it's real low then there is air in the system. And you need to find out why it's low.
Pete Dunham


Users browsing this thread:
1 Guest(s)

Theme © iAndrew 2018 - Software MyBB