North American Turbocoupe Organization



climate control lights flashing?
turbotbirdguy79 Offline
Senior Member
#1
I have an 88 turbocoupe that I just put a heater core in a couple of nights ago.(not TOO bad)Any way everything works but my climate control lights flash (little led lights).Everything works though anyone ever heard of this?Im sure I may have forgot to hook up a connector or something.Any help?thanks!
1988 Tc,SC50(.63),Bosch BPV,Coolingmist methanol injection activated at 10 psi,FMS big valve 1.89/1.59 head,a234,ported E6,ported lower and upper intake,Gillis,3"downpipe,3"exaust,Kirbin AFPR,255 HP LPH pump,Racer Walsh adj cam pully 2* advanced*,K&N cone,MSD Blaster,autolite 103 plugs,T5 swap,3.73s,shifter,Centerforce stage 2 clutch,motorcraft tuneup.
Reply

Pete D Offline
Administrator
#2
http://natomessageboard.com/Forum1/HTML/000218.html
Pete Dunham


Reply

Glenn 88TC Offline
Posting Freak
#3
http://www.turbotbird.com/FAQPage/FAQpag...lay_Blinks

------------------
mods: SDS Digital Fuel Injection, ported & polished big valve head(1.89/1.59), .500 lift roller cam, custom upper and ported lower intakes, 60-1 stage III .63 turbo, powerstroke intercooler, 60mm throttle body, 75pph injectors, Walboro 255HP pump, Kirban adj. fuel reg., ATR header, 3" exhaust with Dynomax Ultraflow muffler, MSD 6al, MSD coil, MSD Launch Control, MSD 8.5mm wires, K&N filter, Star stage III clutch, Greddy Profec B boost controller, Weld Draglites with M/T ET Street 26x11.5/15
NO TC and NO headaches.
Reply

turbotbirdguy79 Offline
Senior Member
#4
thanks a bunch!
1988 Tc,SC50(.63),Bosch BPV,Coolingmist methanol injection activated at 10 psi,FMS big valve 1.89/1.59 head,a234,ported E6,ported lower and upper intake,Gillis,3"downpipe,3"exaust,Kirbin AFPR,255 HP LPH pump,Racer Walsh adj cam pully 2* advanced*,K&N cone,MSD Blaster,autolite 103 plugs,T5 swap,3.73s,shifter,Centerforce stage 2 clutch,motorcraft tuneup.
Reply

Huey866 Offline
Posting Freak
#5
Nevermind, i found the answer.

Huey


------------------
87 Turbo coupe, 5spd, full factory options, custom 3 inch exhaust

[This message has been edited by Huey866 (edited 02-28-2004).]
87 TurboCoupe - silver, 137k, 5-speed, 3.73, 5 lug swap, MM... Evertything, 03 Cobra Brakes, Griggs Subframe connectors, Bo 1.5, Big Valves, massaged 79 turbo head, Essy Cam Gear, Boblog + Elbow, .63 T-3, Stinger Exhaust/FMIC

Currently dreaming about ball-bearings and Pimps
Reply

turbotbirdguy79 Offline
Senior Member
#6
I just forgot to hook up a wire found it thiough!no more flashing!!sweet
1988 Tc,SC50(.63),Bosch BPV,Coolingmist methanol injection activated at 10 psi,FMS big valve 1.89/1.59 head,a234,ported E6,ported lower and upper intake,Gillis,3"downpipe,3"exaust,Kirbin AFPR,255 HP LPH pump,Racer Walsh adj cam pully 2* advanced*,K&N cone,MSD Blaster,autolite 103 plugs,T5 swap,3.73s,shifter,Centerforce stage 2 clutch,motorcraft tuneup.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB