Chroming The Stock Wheels

Ok, I am embarking on a project of having the stock "snowflake" rims chromed. I thought that I had a company lined up but in a recent discussion with a rep, I found out that they don't do wheels. He also informed me that there were no companies in Northern California that did this. He did supply me with the name of a company in Anaheim though.
What I am looking for is some possible leads to companies that do chroming of wheels. Location is not a problem.
All help will be sincerely appreciated.
Gary Schweikert
[email protected]

------------------
NATO Member
1987 Turbocoupe
150,000 Miles
5 Speed
Black w/Raven Interior
Gillis Valve
3" Downpipe
Dynomax Super Turbo Mufflers w/2 1/2" exhaust
Centerforce I Clutch and Pressure Plate
Polished upper intake, lower intake, throttle body, front of turbo, water pump, tensioner pulleys, IAC, EGR, fuel rail. Chromed valve cover, top radiator cover, radiator brackets, alternator, air filter top, top of fan support, wheel centers, intercooler and bracket (all courtesy of Dan Eaves Polishing Services, Tuff Stuff Performance, and J&P Plating)
http://www.turbotbird.com/showroom/gs_87tc.com

You can check with Kirk Dice to see where he had his done.
http://www.turbotbird.com/showroom/KkDe_88TC.html

I hear really good things about this place but I have no idea if they do Chrome plating.
http://www.svoca.com/mainframe.html?http.../deals/ww/

------------------
mods: SDS Digital Fuel Injection, ported & polished big valve head(1.89/1.59), .500 lift roller cam, custom upper and ported lower intakes, 60-1 stage III .63 turbo, powerstroke intercooler, 60mm throttle body, 75pph injectors, Walboro 255HP pump, Kirban adj. fuel reg., ATR header, 3" exhaust with Dynomax Ultraflow muffler, MSD 6al, MSD coil, MSD Launch Control, MSD 8.5mm wires, K&N filter, Star stage III clutch, Greddy Profec B boost controller, Weld Draglites with M/T ET Street 26x11.5/15

Gary,

While at the Ford Carisle show this past year,I picked up a brochure from Wheel Collision Center out of Bath, PA. They specialize in fixing Factory rims that are bent, cracked, scratched,out of round, etc. When I spoke to the guy there, he told me they would chrome, polish, or paint a set of TC rims for me. You may want to give them a call to see how much they charge. Here's their # 610-837-8792. Good luck & let us know how you make out.

------------------
Tony Sceia
Red 88 TC loaded with every option, Walbro 255, 3" SS Downpipe with Magnaflow SS 2.5 Cat Back Mustang Dual system Installed by BJL, 3-core Radiator, Star Stage 2 Clutch, Rebuilt T-5 Tranny, 140 MPH Speedo

Now I need to finish converting to Raven/Gray Leather interior & just do some Body work & she'll be like new.

Gary i have been looking to do the same thing , I had spoke with a friend of mine he told me that he has a place in New Jersey that does it, I am waiting for him to get back to me, hopefully In the next few days . If he gets me the information I will foward it to you and let you know all the details . Every place I spoke with all gave me the same run around.

There is a place here in NJ.....I believe I read about it in the Want Ad Press....I believe it's in Fairfield, NJ. If I find the ad, I'll post the #.

THUNDERBIRD88 THAT WOULD BE GREAT, THE PLACE I WAS TOLD ABOUT WAS SUPPOSED TO BE IN JERSEY CITY BUT I WOULD DRIVE THE RIMS UP TO FAIRFIELD ABOUT 50 MIN DRIVE FROM STATEN ISLAND THANX

Originally posted by Glenn 88TC:
You can check with Kirk Dice to see where he had his done.

House of Hubcaps in New Orleans.

------------------
87 TC, T5, Raven/Gray leather, 14.57 @ 97.

John R., the place is called USA WHEELS and they are located in Fairfield, NJ and their # is 973-227-7977. Good luck.....