Gary S
Joined:
Apr 2001
Burlington, KY
|
|
Need to find out if anybody is into ceramic coating of car parts or knows someone who does it. I have an exhaust manifold off a 87 TC I would like to have ceramic coated (powder coating will not hold up), preferably somewhere close to Ohio, Kentucky, or Indiana but will consider other states if not too far away. Also looking for a rapid turn around time.
Gary Schweikert
|
B_Lieder
Joined:
Jan 2003
Salem, Ohio USA
|
|
Here is a pic of mine. It took 2 weeks to get it back. They had to send it out to Jet-Hot. It cost $120 plus tax. I haven;t installed it yet. 3 more weeks then its on.
------------------
Bill Lieder
1988 TC stock until summer
Bill L
|
Chuck W
Joined:
Apr 2001
Indpls, IN,USA
|
|
Indy Powder Coating here in Indy does ceramic coating. He's located on Gasoline Alley just south of the track, right near KB's shop. They do it in-house.
317-244-2231
Give Gary a call and see what he says...
------------------
Any connection between your reality and mine is purely coincidental..
83 Pseudo-Coupe, 87 Ranger (soon to be 2.3T), 84 XR7, 86 XR4 and 62 Mercury Monterey (old n slo)
NATO Member
83 TC Clone, 85 Mercury LTS, 97 Volvo 850 T5 Turbo, 78 Volvo 240, 93 F150
|
curtb
Joined:
May 2003
Elizabethtown Ohio 45052
|
|
Just being curious but what temps does the exhaust manifold reach? Eastwood manufactures a powder coat that withstands 1000 degrees.
|
B_Lieder
Joined:
Jan 2003
Salem, Ohio USA
|
|
Quote:Originally posted by curtb:
Just being curious but what temps does the exhaust manifold reach? Eastwood manufactures a powder coat that withstands 1000 degrees.
I am thinking somewhere in the 1600 plus area.
------------------
Bill Lieder
1988 TC stock until summer
Bill L
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
1400 normally but as much as 1800 if it goes lean
------------------
NATO Member. it's not a vice, it's an obsession
Good judgement comes from bad experience, and a lot of that comes from bad judgment.
88 TC X 2, 86 SVO, mods list at
http://www.turbotbird.com/showroom/pd_88tc.htm
Pete Dunham
|
mmedic50
Joined:
May 2001
Garrett, Indiana 46738
|
|
I got one from e bay, a ported E-6 that was ceramic coated for 140.00 from these guys, [email protected] Their powdercoating work looks great too.
1988 TC 5 speed, Dark Blue
Build date 5/88.
140 mph Ford Motorsport Speedometer
Tripminder
Walbro 255 Fuel Pump
Kirban Adj. Fuel Pressure Regulator
K&N Air Filter
Gillis Boost Control Valve
New rebuild- .030 over pistons.
SS valves(1.89/1.59).
Center Force Stage II clutch.
ARP head studs.
Crane roller cam .450 lift.
Gutted upper and ported lower intake.
Ceramic coated and ported E6 exhaust.
|
|
I ceramic coat but I only do one color and that is black. It's a flat black and I use it cause it's rated at 2000*F. I don't have the silver color, wish I did..
bob
------------------
I Heart Turbo Coupes
www.40fords.com
www.40BOB.com
|