brunos50
Joined:
Oct 2001
Elyria, oh, us
|
|
I was just wondering where i could find a motorsport cam listing for a turbocoupe?
I'd like to see cam specs and how many different cams are out there.
Thanx
91 Mustang LX 5.0
mods: built AOD, 2800 stall, 3.73's, BBK cold air, 1 3/4 Hooker equal length, BBK off road h, Flowmaster 2 chamber cat back, BFG 255/50/16 drag radial, NX single nozzle(wet)
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
I think Dave at Tiny Avenger sells the Motorsports cam. See the Vendors page for a link
------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham
|
brunos50
Joined:
Oct 2001
Elyria, oh, us
|
|
Thanks it was in there! no specs on it though
91 Mustang LX 5.0
mods: built AOD, 2800 stall, 3.73's, BBK cold air, 1 3/4 Hooker equal length, BBK off road h, Flowmaster 2 chamber cat back, BFG 255/50/16 drag radial, NX single nozzle(wet)
|
jeffg
Joined:
Apr 2001
elyria,ohio,usa
|
|
Bruno, i have the specs for a hydrualic roller cam a-237 want me to email it to you?
86TC,85XR7,99 Mountaineer. Need for Speed
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
See http://www.merkurencyclopedia.com/ Click on Camshaft in the left colume and scroll down.
------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham
|
brunos50
Joined:
Oct 2001
Elyria, oh, us
|
|
yeah jeff if you would i appreciate the help!
91 Mustang LX 5.0
mods: built AOD, 2800 stall, 3.73's, BBK cold air, 1 3/4 Hooker equal length, BBK off road h, Flowmaster 2 chamber cat back, BFG 255/50/16 drag radial, NX single nozzle(wet)
|
|