cam followers &valve train&injectors

Q:where is a good place to buy cam followers putting a cam in and need them
also is worth it to buy the follers with the steel insert in them putting in a lunati 274/.500
Q: where is a good place to send injectors to be cleaned and flowed for a resonable price
thanks mike

------------------
88tc 70mm tb&ic gutted upper&ported lower t3 boost cont. atr 3.in exh down&out 80mm maf cold air& big k&n msd6a 42lb injs 255 pump eec-tuner lightened flywhl 5spd 4.30 gears 200hp&240tq to grnd at 5200 ft alt stock internals

1.Roller or slider cam?

2. Ask your local mechanics where they send their injectors. Chances are it's someplace local and cheaper than the big name outfits found in th erodding magazines

------------------
NATO Member. it's not a vice, it's an obsession
"The nice thing about each new day is nobody ever used it before" Barnaby Jones
88 TC X 2, 86 SVO, mods list at
http://www.turbotbird.com/showroom/pd_88tc.htm

the cam is a slider
the local place here wants 28.00 a piece to clean and flow thats more than rcenginering but anway thanks mike

I got a couple sets done for about $70 per set locally

------------------
NATO Member. it's not a vice, it's an obsession
"The nice thing about each new day is nobody ever used it before" Barnaby Jones
88 TC X 2, 86 SVO, mods list at
http://www.turbotbird.com/showroom/pd_88tc.htm

anything on the slider followers
Mike

http://www.racerwalsh.com/2300_cylinder_head.htm

scroll about half way down.

------------------
NATO Member. it's not a vice, it's an obsession
"The nice thing about each new day is nobody ever used it before" Barnaby Jones
88 TC X 2, 86 SVO, mods list at
http://www.turbotbird.com/showroom/pd_88tc.htm