#1 |
.....cam cam cam.
OK, i a lil worked up, just laid my fiurst patch of rubber (BY ACCDIDENT!)
Ok i wanna put my camshaft from my other head i have laying around, its a bgger cam, street/strip cam has lots of low end power and suffenct til about 6500rpm, hten drops dead right before rev limiter.
What is the process of doing this?
pete said i had to jack up part of the motor top get the one out of the car.
But how does it come out, i noticed the #3 screws in the back of the hea holding the cam in. I always sent the head out to get the cam repalced, but my shop closed down cuz the guy was offered a job at Ford in detriot. So my warranty is up and ic an geta 20 cam swapp anymore.
So anyoen have the step by stpe process?
tips, tricks, etc etc
------------------
Brian J Larkin
1988 Turbo Coupe 5spd, dark blue and shining like a peice of polished glass.
http://crazydriver358.5u.com
OK, i a lil worked up, just laid my fiurst patch of rubber (BY ACCDIDENT!)
Ok i wanna put my camshaft from my other head i have laying around, its a bgger cam, street/strip cam has lots of low end power and suffenct til about 6500rpm, hten drops dead right before rev limiter.
What is the process of doing this?
pete said i had to jack up part of the motor top get the one out of the car.
But how does it come out, i noticed the #3 screws in the back of the hea holding the cam in. I always sent the head out to get the cam repalced, but my shop closed down cuz the guy was offered a job at Ford in detriot. So my warranty is up and ic an geta 20 cam swapp anymore.
So anyoen have the step by stpe process?
tips, tricks, etc etc
------------------
Brian J Larkin
1988 Turbo Coupe 5spd, dark blue and shining like a peice of polished glass.
http://crazydriver358.5u.com
Brian Larkin
88TC 330,000 miles
Slightly Modified
88TC 330,000 miles
Slightly Modified