wydmotorsports
|
Joined:
Aug 2002
north charleston s.c
|
|
hey got a new map sensor today and the guy said it probably went bad due to fact that i had no vac line hooked to it ? sound right but if vac is supposed to go to it where do i hook it to?also my otherquestion is the aftermarket boost controller i have (turbo xs) where do i hook the signal line or in a easier term the line coming from turbo that senses boost i know the wastegate one is ok but cking my connections
87 tc,lowered,17inch cobra r wheels,4inch cowl hood,saleen wing,new engine,new turbo injectors,vam,fpr,seats,etc,new orion silver paint with silver flake and blue pearl to boot,and more just cant list all here
|
Pete D
|
Joined:
Apr 2001
Northern OH
|
|
There is no vacuum line to the BP sensor on our cars. This sensor is only for sensing barimetric pressure, not manifold pressure/vacuum.
On the boost controller, if your asking where to source the boost signal input line, use either the vacuum tree, or the compressor outlet
------------------
NATO Member. it's not a vice, it's an obsession
Good judgement comes from bad experience, and a lot of that comes from bad judgment.
88 TC X 2, 86 SVO, mods list at
http://www.turbotbird.com/showroom/pd_88tc.htm
Pete Dunham
|
wydmotorsports
|
Joined:
Aug 2002
north charleston s.c
|
|
like where on the side of the turbo where there is a tee setup?
87 tc,lowered,17inch cobra r wheels,4inch cowl hood,saleen wing,new engine,new turbo injectors,vam,fpr,seats,etc,new orion silver paint with silver flake and blue pearl to boot,and more just cant list all here
|
