North American Turbocoupe Organization



Bone stock track results
DAN2.3 Offline
Member
#1
Went to Napierville Dragway October 25th and did new personal record with my bone stock t-bird.
14.21 at 94mph with 1.91 60ft. I guess it's not to bad since it was done with a bog just before the finish line. I'll try to fix that before the week-end and if the weather's good,i'll try to beat that time.
Medium Budget Dan!
87 TC,stock long block with a237 cam,Stinger 3 inch exhaust and PIMP,svo T3,75# injectors,top mount intercooler with bov,3500 stall with c4,Hoosier slicks and skinnies.
Reply

tr_guy79 Offline
Senior Member
#2
14.21 in the 1/4???

If that is BONE stock, people in hell are no longer thirsty...
3rd Annual Philly Tri-State NATO Meet - http://natomessageboard.com/ultimatebb.p...p=1#000003

'87 - Range Roller 4* adv / 50 trim t04e / Ported E6 / Gutted Knifed intake / Stinger 3->2.5" / Adj. Cam Pulley / Warlboro 255

To Do: PIMP/MS2, FMIC, Bigger Inj
Reply

Redbone Offline
Senior Member
#3
Quote:Originally posted by tr_guy79:
14.21 in the 1/4???

If that is BONE stock, people in hell are no longer thirsty...
Yea, that's kinda what I was thinking.

According to MotorTrend, a stock '87 5 speed was running low 16's.
All your boost are belong to us
1988 TC 5m 3" elbow back exhaust(with cat and muffler), Walbro 255, gillis mbc, airbox removed w/ K&N cone, A/C removed, Spec clutch, Ranger roller swap.

John A.
Reply

tr_guy79 Offline
Senior Member
#4
The best I ever got out of mine stock was something like a 16.03, if I remember correctly.

My brainometer tells me you would need somewhere around 325hp at the crank and be a damn good driver to pull off a 14.21 in a TC
3rd Annual Philly Tri-State NATO Meet - http://natomessageboard.com/ultimatebb.p...p=1#000003

'87 - Range Roller 4* adv / 50 trim t04e / Ported E6 / Gutted Knifed intake / Stinger 3->2.5" / Adj. Cam Pulley / Warlboro 255

To Do: PIMP/MS2, FMIC, Bigger Inj
Reply

Pete D Offline
Administrator
#5
How does a "bone stock" 155HP Auto TC turn in over 2 seconds better than what the mags got out on a 190 HP, 1987 5 speed? Anxiously awaiting video, time slip and other reconciling factors.
Pete Dunham


Reply

DAN2.3 Offline
Member
#6
Hoosier and technic! Front and rear sway bar removed and power steering deleted!!!!
I'll also have a picture of the engine compartment as soon as i figure out how to post them.
Medium Budget Dan!
87 TC,stock long block with a237 cam,Stinger 3 inch exhaust and PIMP,svo T3,75# injectors,top mount intercooler with bov,3500 stall with c4,Hoosier slicks and skinnies.
Reply

tr_guy79 Offline
Senior Member
#7
I had technic once. They gave me a pill that got rid of it.

Dan, you have to understand our skepticism. You are claiming you are about 3 sec better than stock due to some slicks and an STD. I'd love to know how you did it. Even with my mods (see sig) I am not sure I could pull off that time. I am not even sure your fuel pump could keep up...
3rd Annual Philly Tri-State NATO Meet - http://natomessageboard.com/ultimatebb.p...p=1#000003

'87 - Range Roller 4* adv / 50 trim t04e / Ported E6 / Gutted Knifed intake / Stinger 3->2.5" / Adj. Cam Pulley / Warlboro 255

To Do: PIMP/MS2, FMIC, Bigger Inj
Reply

DAN2.3 Offline
Member
#8
Fuel pump will be the first modification that i will do,also i bought a front mount ic like a week ago.Planning on changing tb to 94-95 5.0L and port the intake.The only thing i'm not sure is if it will be blow thrue or normal.I picked up a holset hx35,but i also have a t3.I also need to switch to roller cam because this is holding me big time.
Medium Budget Dan!
87 TC,stock long block with a237 cam,Stinger 3 inch exhaust and PIMP,svo T3,75# injectors,top mount intercooler with bov,3500 stall with c4,Hoosier slicks and skinnies.
Reply

DAN2.3 Offline
Member
#9
See time slip in track lounge
Medium Budget Dan!
87 TC,stock long block with a237 cam,Stinger 3 inch exhaust and PIMP,svo T3,75# injectors,top mount intercooler with bov,3500 stall with c4,Hoosier slicks and skinnies.
Reply

DAN2.3 Offline
Member
#10
See video on youtube under 1987 stock Thunderbird Turbo Coupe.
Medium Budget Dan!
87 TC,stock long block with a237 cam,Stinger 3 inch exhaust and PIMP,svo T3,75# injectors,top mount intercooler with bov,3500 stall with c4,Hoosier slicks and skinnies.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB