North American Turbocoupe Organization

Body kit for 88 thunderbird
88turboeric Offline
Junior Member
Hey guys,

I have an McK body kit for my 88 turbocoupe and plan to start making my own with fiberglass (using the McK kit as a mold) soon as no company makes it for our cars anymore. I just want to see how many people are interested to see how much materials to order. I don't know what I will charge yet, more details to come...

Pics can be seen here until I get my pics up. (The red car)
1988 Thunderbird Turbo Coupe 5 spd

Frank Offline
Junior Member
It would depend on the price, but am definitly interested. Keep us posted on the details.
Restoring a 88TC Auto into a 5-Speed with hydrolic clutch. So far, paint job, engine rebuild. Supension rebuild.

rikincasper Offline
Junior Member
I would be very interested in the body kit as well.
Turbo Tbird,,,, what else could ya want??

Ricky03 Offline
Senior Member
I would be interested for the right price.
88TC :5 speed swap,255 walbo fuel pump, 3" down pipe with 2 1/2"duals, Ported upper and lower intake, ported E-6, Kiben adjustable fuel pressure regulator,T-3 turbo,Forge BPV,Steeda Tri-x shifter,Autometer gauges,Racer Walsh stage #2 cam, Spec stage 3 clutch,Stinger FMIC

T-BirdX3 Offline
Senior Member
"Error 404 Page Not Found"

This is what I get when I try your link. The price would defiantly be the deal maker, these cars look awesome with the ground kit.
'88 T-Coupe 5 speed/'88 T-Coupe Auto
'87 T-Coupe 5 speed/'87 T-coupe 5 speed(76k orig mile)
..... and there was light!

Rob.. Offline
I want to live in a world where monkeys don't dig up the dead and parade about in their shoes.
88 7F, SS big valve head, port matched in/ex, gutted and powdercoated intake, A-237, stealth T3/T4 Garrett hybrid, Abaco 85mm mass-air meter conversion, tripminder, Walbro 255 high pressure, SVOJohn tuned.

gadgetolds Offline
Posting Freak
Prolly not found cuz the thread is a year old now
1988 Turbo Coupe - A237 cam, K&N Cone, T3(.60-.63), 255 Walbro, Gillis BV, gutted and knifed intakes, ported e6, 3" elbow/dp to dual 2.5s, Kirban and spearco fmic.

Up next, ported head, t3/t4 upgrade.

Safety Dude Offline
I'd love to put a kit on my car. I'd like to see a picture and I trust it would be at a fair price.
1987 Turbo Coupe,Black with red cloth, 5spd, 70,000 miles. In the process of being dissasembled, detailed and reassembled using the best of the parts that I have from 6 past T-birds. 17" TSW Chrome rims with Wanli rubber, Sony disc player with Type "R" Alpine subs, K&N cone, Centerforce Clutch, MSD Ignition, Sequential tailights, B&M Short Shifter. Much more work to be done but lovin' every minute of it. Updates to come...

zbird Offline
Posting Freak
I love that kit.
Dom Z
88 T/C med grey. 140 MPH Speedo, Kirban FPR, Gillis valve,Tripminder, K&N.
87 T/C Silver, Auto (project Daily driver)
99 F150 4x4
14 Ford Escape 2.0L Turbo
88 T/C
87 Silver

jangus Offline
Senior Member
I need to find the TurboCoupe specific center part of the air dam, then I could start molding copies off the NOS body kit I've got in the shed. Unfotunately the center piece of the air dam I have is for the standard Tbird.
88TC 5speed, 160,000+, ranger roller, Evergreen T3, cone filter, manual boost controller.
One parts car still waiting to be taken apart.
Waiting in the garage: SC throttle body, SC intercooler, graphic equalizer, among other things.

Users browsing this thread:
1 Guest(s)

Theme © iAndrew 2018 - Software MyBB