RDOG
|
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
After my Bird went up in flames, I bought another and she's almost ready to go.I would post pics , but cant for some reason. It has a 92 stang roller cam, ported E6, T3/Buick GN(super 60) turbo, adj cam gear, profiled lower, major head porting, adj fpr, 255lph in-tank fuel pump,a new balanced & blueprinted block, 60mm TB and a rotated and gutted upper coming. Lastly, a front mount Big NPR IC between bumper cover and ac condensor. Roughly how much horse am I looking at? Does a esslinger belt tensioner pulley make a difference or worth the money? All suggestions welcome. Go easy, even Dogs have feelings [Image: smile.gif]
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
Dan E
|
Joined:
Apr 2001
Greensboro, NC
|
|
Just a guess but maybe looking at 150 RWHP (Just Kidding LOL !)
Actually, I'd guess 280-290 RWHP ???
Dan Eaves
88TC 5spd Vermillion Red, Polished...everything...
|
SteveX82
|
Joined:
Apr 2001
Toms River, New Jersey
|
|
How much boost are you running? If this is of any use to you, I made about 225rwhp on my 96mph run with the mods listed in my profile. I should have my volvo front-mount installed this weekend so I can take it to the track and get some more numbers for you. Assuming you're running at least 22psi of max boost, I'd estimate somewhere around 240-250rwhp, 300crank.
------------------
maroon 1987 TC 5spd, 131k miles
k&n cone in fenderwell, gillis valve set at 18lbs (22 at track), kirban adjustable fpr set at 42psi, walbro 255 hi-pressure pump, bosch hi-pressure bypass valve, ported e6, .60/.48 T3 turbo, full 3" exhaust
Best 1/4 mile: 14.528 (with 2.272 60' time)
Best trap speed: 95.87mph
Estoril blue 1987 TC 5spd, 148k mi, a237, Bailey BOV, spec stg3 clutch, spearco FMIC, 50 trim t3/t4, 3" exhaust, Bamafuel, LM1, 55pph
Best 1/4 mile: 12.31 @ 110mph on 25psi
|
RDOG
|
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
Dan, you almost made me hurl. Glad I read on [Image: smile.gif] Any ideas on the esslinger pulley tensioner
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
|
