ATR exhaust

I have some questions about the exhaust. Does the ATR downpipe replace the elbow after the turbo? And Im getting that and their 3in. single exhaust. That is $395. If I need a catalytic, how much would the downpipe be? Cause it says cat/race pipe is $195, and it says the 3in downpipe is $295. So do I need to buy both of those, or just one? Any help would be great. Thanks.

------------------
87 turbocoupe, 5-speed, Completely loaded, superchip, bleeder valve set to 17 psi, Kn cone

My understanding is that $195 you get a converter AND a seperate pipe that fits in place of the converter for "off road/race" purposes.

On the down pipe, ATR claims the TC version bolts up to the existing waste gate (87-88, IHI turbo)

Their SVO system (T-3 turbo) down pipe REQUIRES an external, extra cost wastegate.

If you plan to eventually upgrade to a T-3 turbo, you might have problems. You might want to call ATR and discuss your options.

------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS. Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.

[This message has been edited by Pete D (edited 03-12-2002).]

I purchased a 3" Stainless Steel down pipe from Tiny Avenger for $100.00 and it bolted directly to the T3 turbo. It bends towards the drivers side of the car to avoid the fuel pump that is mounted to the rail of my car. You can contact Tiny by going to the "Vendor" section of this site and finding his web site.

------------------
1984 Turbo Coupe - currently under complete restoration.