North American Turbocoupe Organization



Anyone got any wiring diagrams?
cinnamonrollz Offline
Junior Member
#1
New to the forum. Im located in wisconsin. I have a small block chevy swapped 84 turbo coupe, specs will be at the botom of the post if anyone is interested. I was wondering if perhaps anyone knew any good resources for finding wiring diagrams? Half the electronics are deleted and I would really like to simplify the loom and replace the factory switches for things like the headlights. The only real set back for me is trying to decode the rainbow colored mess that sits wrapped around my steering column. And before anyone goes nuts on me, yes I have spent plenty of time on google searching for the answers myself.


84 ford thunderbird turbo coupe with about 80 thousand miles. B&M pro stick. Sound deadening removed. Fuel cell in the trunk with a battery relocation. Master switch. Trunk is sealed off from the rest of the car. Lots of stainless steel custom fabbed panels. Certified roll cage. 5 point harness. UPR Tubular k member. UPR chromolly rear controll arms. New 3.73 8.8in rear end with a full spool. Weld racing alloys. Has frame connectors welded in along with lots of plate steel. Any chasis flex it ever had has been eliminated. Molded in hood scoop. Lots of cool stickers. lol.

4 bolt main chevy 350 block bored 60 over
ported 283 heads
chrome dress up kit, holley valve covers
edelbrock performer 2101 intake mani
holley 4 barrel carb
custom headers
srp pistons 12.9:1 cr
custom dizzy
gm 350/350 style cam with a custom regrind.
hydraulic roller lifters, adjustable roller rockers
th350 with a manualized valve body and 2800 stall
Reply

V6TBird87 Offline
Posting Freak
#2
http://www.ebay.com/itm/1984-Ford-Thunde...2G&vxp=mtr

That should have everything you need.
2018 Mustang GT
1988 Turbo Coupe, 5-speed

aka Tbird232ci
Reply

BogusSVO Offline
Member
#3
sounds like a decent little 350 horse 350

Hope you get the wiring sorted out
Owns more Turbo FORDS than the law should allow....and still getting more

85 TC going under the knife
84 Turbo ranger --($800.00 ebay) Redneck work truck
Reply

anasazi4st Offline
Senior Member
#4
In addition to the posted link, you'll find more wiring diagrams than you'll know what to do with if you just do a Google IMAGE search for something like "Ford Turbo Coupe wiring schematic".

Speaking of which (and not meaning to hijack the thread), but does anyone have access to or know where I can find a schematic for the electronic components found inside the Ford Premium Sound radio? My FM has gone out.

Thanks in advance.
Another proud dues-paying member.

1987 Turbo Coupe w/T5OD, 8.8 axle, grey smoke; most options. Got it in 1991 with 41K miles: 3 turbos, 2 heater cores, 3 T5OD full rebuilds, 6 clutches, 1 head gasket, 2 Teves II ABS units, etc. later....
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB