North American Turbocoupe Organization



Anti-lock Brakes Pressure Switch Part Number
88chickentc Offline
Junior Member
#1
Does anyone know a parts source for the Teves anti-lock brake pressure warning switch?  I found a switch on Ebay that I think might work seeing as our system was also used on some Buicks and such.  

https://www.ebay.com/itm/Brake-Pressure-...0005.m1851

Does this look right?
Reply

Jeff K Offline
Administrator
#2
I think the electrical connector is slightly different on the GM version, but since the GM switch is the only one available, you may have to mod the wiring a little bit to get it to work.
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
05 Taurus SEL Duratec daily driver
04 Taurus Duratec (wifes car)
02 Pontiac Grand Prix GT
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

anasazi4st Offline
Senior Member
#3
(05-28-2019, 02:47 AM)88chickentc Wrote: Does anyone know a parts source for the Teves anti-lock brake pressure warning switch?  I found a switch on Ebay that I think might work seeing as our system was also used on some Buicks and such.  

https://www.ebay.com/itm/Brake-Pressure-...0005.m1851

Does this look right?

Yeah that looks like it could be it. But at $126, that’s a lot of money to pay for an educated guess.
Another proud dues-paying member.

1987 Turbo Coupe w/T5OD, 8.8 axle, grey smoke; most options. Got it in 1991 with 41K miles: 3 turbos, 2 heater cores, 1 T5OD full rebuild, 5 clutches, 1 head gasket, 2 Teves II ABS units, etc. later....
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB