Adding oil pressure gauge

Is there an easy location to get at a plug or port where I can put a 1/8" npt fitting for a oil pressure guage line?

I was hoping not to mess with the turbo oil line...


------------------
88 turbocoupe, 3 in exhaust (dn pipe/high flow cat/Dynomax muffler) to 2.5" pipes, man boost contl, 9" K&N front of radiator, 130A alt, intercooler fan, Lincoln frt calipers, Saab airdam, BPV, auto to 5 spd.

The easiest is to remove the existing sender and connect there; of course this disables the existing gauge. Some have put a "tee" there and run both old sender and new gauge.

BTW it's not as hard to get in there as it looks if you pull the upper intake/throttle body. Once you do that there's plenty of room.

HTH.

------------------
Joe F.
JR's Place - My 87 TC

= If factual statements hurt your feelings then adjust your view of reality =

Thanks!
I'll try putting a tee in.

------------------
88 turbocoupe, 3 in exhaust (dn pipe/high flow cat/Dynomax muffler) to 2.5" pipes, man boost contl, 9" K&N front of radiator, 130A alt, intercooler fan, Lincoln frt calipers, Saab airdam, BPV, auto to 5 spd.

I run both oil pressure gauges. See Pic

Thanks for the picture.
As they say it's worth a thousand words...