North American Turbocoupe Organization



abs code 12?
Reamer Offline
Member
#1
abs code 12....what excatly is this telling me?
STEPS-No steps to perform
RESULT-Electronic Controller-Replacer
the other codes are just 33= passanger or RR vss
88 T/C,blue/blue leather, built a4ld w/stall,kirbin,walbro,nx halo spray bar,k/n,gilis,2.5 exhaust
97 xr7 v8 sport loaded 5spd,pi top,tuned,3.45's DD 25mpg
07 gt mustang 5spd all stock
68 mustang jcode
"It is better to keep your mouth closed and let people think you are a fool than to open it and remove all doubt."
Reply

Pete D Offline
Administrator
#2
The Electronic Control Module is mounted on the fold down shelf in the trunk. It's in the center of the shelf toward the passenger side.

This article may give some help. http://www.albeedigital.com/supercoupe/a...ystem.html
Pete Dunham


Reply

Reamer Offline
Member
#3
yeah i found that a few years ago(mn12) and i read it again before i asked the question tons of info... thanks.

but is code 33 tripping the code 12?...or is 12 telling me to replace the controller?.

i think i figured out the 33 problem. just had a lil air gap prob...lol... the vvs wasnt bolted down it was just floating there. i havent got the chance to drive the car but pinned it and had (2?? a/c mv) when i spun it so figured it was good.
88 T/C,blue/blue leather, built a4ld w/stall,kirbin,walbro,nx halo spray bar,k/n,gilis,2.5 exhaust
97 xr7 v8 sport loaded 5spd,pi top,tuned,3.45's DD 25mpg
07 gt mustang 5spd all stock
68 mustang jcode
"It is better to keep your mouth closed and let people think you are a fool than to open it and remove all doubt."
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB