Mikey97D
Joined:
Jan 2018
CONNECTICUT
|
|
Anyone have a rear brake caliper diagram?
I am on my 2nd leaking driver side caliper from AutoZone. 1st time was off the puck and this time it is the swivel for the emergency brakes. Anyone know if I need to disassemble the puck to get to the swivel?
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.
|
Mikey97D
Joined:
Jan 2018
CONNECTICUT
|
|
Someone helped me with the Ford manual and scanned the pages out of it.
If anyone else needs these in the future please don't hesitate to ask.
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
In my experience, lots of reman parts, especially from places like AZ, are complete and total JUNK. The internet is full of complaints of "lifetime guarantee" AZ starters, alternators, etc failing within a few months. Yes, you get a free replacement, but that doesnt do much good when you are stranded on a lonely dark road in the middle of the night.
I bought brand new rear calipers for the TC from NAPA roughly 16 or 17 years ago. They were pricy (I seem to remember around $70 each), but they have performed flawlessly for the last 16+ years / 75K miles.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
Mikey97D
Joined:
Jan 2018
CONNECTICUT
|
|
That is the general consensus i have been hearing from many people. You are the second person mentioning the NAPA calipers.
I got another replacement from AZ but this time flushed it out so we'll see. I don't have high hopes and I did find a kit to rebuild the caliper. When this one leaks and I disassemble it and nothing obvious is wrong I will probably go the NAPA route this time and take the loss. At least I have some insight on the caliper before disassembly.
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.
|
|