BJ SIMMERS
Joined:
Jul 2007
Dayton, PA
|
|
car sat for a couple years. I ran it once and a while in that time, but I decided to put it back on the road and now the brake pedal is hard to push. Calipers aren't froze up and I've checked some vacuum lines. I have some brake but it is beyond hard to push. My rear brakes seam to work fine because the e brake engages and disengages perfectly fine. What is the deal? When I ran it yesterday and parked it, the front brakes seamed warm but, the rear was cool to the touch. Both of the brake warning lights on the dash are on. Any help on this would be appreciated.
I'd rather be hated for what I am, than to be loved for what I am not.
rides: 87 TC, 90 vw jetta 1.8l, 98 vw jetta 2.0l, 97 ford f250 crew cab 460ci, 85 bronco 351 ci, 66 merc. comet cyclone gt beefed 289, 94 hd sportster 1200cc, 97 thunderbird 3.8l
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
Do you here a buzzing from under the hood when the key is turned to RUN. If not, the brake booster pump probably isn't running and they may be a simple relay problem. The relay is the front one of two under the black cover directly below the vacuum tree. For diagnosis refer to: http://www.turbotbird.com/techinfo/TEVES...%20TCs.htm
Pete Dunham
|
BJ SIMMERS
Joined:
Jul 2007
Dayton, PA
|
|
Thanks for the info again Pete. I'm going to check it tomarrow.
I'd rather be hated for what I am, than to be loved for what I am not.
rides: 87 TC, 90 vw jetta 1.8l, 98 vw jetta 2.0l, 97 ford f250 crew cab 460ci, 85 bronco 351 ci, 66 merc. comet cyclone gt beefed 289, 94 hd sportster 1200cc, 97 thunderbird 3.8l
|
BJ SIMMERS
Joined:
Jul 2007
Dayton, PA
|
|
Relays seam to be fine. Brakes still messed up.
I'd rather be hated for what I am, than to be loved for what I am not.
rides: 87 TC, 90 vw jetta 1.8l, 98 vw jetta 2.0l, 97 ford f250 crew cab 460ci, 85 bronco 351 ci, 66 merc. comet cyclone gt beefed 289, 94 hd sportster 1200cc, 97 thunderbird 3.8l
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
Did you look through all the diagnostics in the article I linked?
Pete Dunham
|
BJ SIMMERS
Joined:
Jul 2007
Dayton, PA
|
|
I'm still going through it. It's just being a pain. But that is what I get for letting it sit for four years.
I'd rather be hated for what I am, than to be loved for what I am not.
rides: 87 TC, 90 vw jetta 1.8l, 98 vw jetta 2.0l, 97 ford f250 crew cab 460ci, 85 bronco 351 ci, 66 merc. comet cyclone gt beefed 289, 94 hd sportster 1200cc, 97 thunderbird 3.8l
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
I guarentee that the tech article Pete linked to will find the problem.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
BJ SIMMERS
Joined:
Jul 2007
Dayton, PA
|
|
It ended up being the relay after all. I printed out the tech article and I have it in the glove box of the car. I changed the relay first after starting this post. Then read the article, So I checked the motor with the jumper wire and it worked. I took the new relay back and got another one and BAM, I have brakes. MANY THANKS PETE, and thank you Jeff for backing it up. I am also married to my TC once again!!!!!
I'd rather be hated for what I am, than to be loved for what I am not.
rides: 87 TC, 90 vw jetta 1.8l, 98 vw jetta 2.0l, 97 ford f250 crew cab 460ci, 85 bronco 351 ci, 66 merc. comet cyclone gt beefed 289, 94 hd sportster 1200cc, 97 thunderbird 3.8l
|
|