'85T-BirdTurboCoupe
|
Joined:
Jul 2011
Columbus, Ohio
|
|
Planning on doing a coolant drain & fill, and would replace the radiator hoses if I can find a set of NOS hoses.
If anybody has the factory part numbers so I can start looking, they would be greatly appreciated.
Thanks!
Jeff
Just purchased my '85 TurboCoupe 5-speed from the original owner in Plymouth, MI. It's 100% factory original with only 40K miles!
|
Not B Anymore
|
Joined:
Apr 2001
Nokesville, VA, USA
|
|
E8SZ-8260-E Hose,radiator upper 4Cyl. 18.45
E8SZ-8286-D Hose,radiator lower 4Cyl. 33.57
These are 87-88 part numbers, but, though I could be wrong, I'm thinking they are the same as yours.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
'85T-BirdTurboCoupe
|
Joined:
Jul 2011
Columbus, Ohio
|
|
Thanks B!
Just purchased my '85 TurboCoupe 5-speed from the original owner in Plymouth, MI. It's 100% factory original with only 40K miles!
|
'85T-BirdTurboCoupe
|
Joined:
Jul 2011
Columbus, Ohio
|
|
Just ordered a set from a Ford dealer
on the East Coast. They only had 1 of
each left and wanted to move them.
The latest list on the bottom hose was just
over $100 (confirmed by 2 other dealers!).
This dealer cut me a deal on it at $40!!
Now if I could just find 4 NOS hose clamps!
Thanks again B for your info.
Jeff
Just purchased my '85 TurboCoupe 5-speed from the original owner in Plymouth, MI. It's 100% factory original with only 40K miles!
|
RC Martin
|
Joined:
Mar 2006
Colorado
|
|
I want to see pics of your 40k mile all original 85  Good luck keeping Ford parts on it, we all know that will get trickier as the years pass.
Thunderbird Turbo Coupe, Bright Canyon Red TuTone, Desert Tan Interior; 1 of 7 in this combo in 1984 according to Marti. 1 of 13,361 TCs in 84.
Rebuilt, 3-Angle Valve Job, SYB37 "OE/Small" Slider Cam
Full 3" Stinger Exhaust to Flowmaster 40, Gnari FMIC/Recirc/BPV, MBC @ 18psi, RF-E6 Manifold, Remote-Mount TFI, PC1 and Flowed 35# Injectors, Inline Walboro 255HP, Kirban AFPR
Rebuilt Suspension -- KYB & Energy Suspension
|
