North American Turbocoupe Organization

84 TC Rear disc brake install... How?
svo_thunderchicken Offline
Senior Member
I am interested in puting rear disc brakes on my 84 tc. I DO NOT want to do a rear end swap. Does anyone know where i can get the mounting flanges to put on the axels? I have had no luck at junk yards.
84 TC Silver 5 speed - PE EEC, Big Vam, RR cam, 35lb injectors, E6 swap, T3 60 Trim, 87-88 intercooler and hood, BOV, K&N Cone Filter *under constrution*

87 TC Black 5 Speed - Stock IHI, BCS Bypassed

tps87turbo Offline
Posting Freak
You may be able to use the conversion kits used on Mustangs to convert it to rear discs, but I think they least expensive way would be to replace the rear with one from an 87-88 TC.

Tony Sceia -

HIS Red 88 TC

HERS - Blue 87 TC, fully loaded with every option, Gilies Valve, K & N Filter, 3-core Radiator, New Paint...just needs to be put back together, Interior re-done & get some exterior parts.

87 TC - Bought as a Parts Car, & will remain a parts car now that I found the blue one.
Tony Sceia -

HIS Red 88 TC
HERS - Blue 87 TC, fully loaded with every option, Work in Progress
87 Gray TC Parts Car - Gave to BJL and is now his daily driver

karnage Offline
They have the right parts to do the job.Should be able to find an SN-95 stang in the yards for parts.Or a lincoln Mark VII a crown vic,marquis etc.
84 TC with 88 hood LA-3 full 3" exhaust Rods header ported/polished big valve head schneider roller cam RW adj cam gear Kirban gillis at 20 # boost MSD ignition 255 lph Walbro full gauges
17 inch centerlines 944 front mount IC 80mm MAF
65mm tb-rotated intake on the way to 400HP

Users browsing this thread:
1 Guest(s)

Theme © iAndrew 2018 - Software MyBB