North American Turbocoupe Organization



5 lug Conversion
BigNug Offline
Member
#1
Did the search for 5-lug conversions. What I would like to do is go to Ford with a parts list of what I need to convert a 85 TC from 4 lug to 5 lug. Not interested in Hi performace stuff, just something I can just write the check, slip on and go. So if anyone would have a list of part numbers I could use that would be great. I have the Brothers Catolog and they sell a conversion, but if I can get it from my local Ford dealer that would be great. Thanks for all of your help. I'm a little apprehensive about getting something out of a catalog. Just want to keep this simple. Part numbers would be great. Thanks in advance. Hope to see everyone in the Twin Cities out at Porky's this summer, if it ever arrives.
Bignug
Reply

darkthunder Offline
Senior Member
#2
You need 10" 5-lug rotors for the front.

These two vendors sell them.
http://www.completebrakeservice.com/
http://www.northcobras.com/

That is sourced from: http://www.coolcats.net/tech/advanced/4to5lug.html

In the rear you may have a couple options. Check out the above link for details.

There is also a Suspension Forum
http://natomessageboard.com/ultimatebb.p...forum;f=29
darkthunder - 85 TC// 302/C4
2009 Subaru WRX//daily driver
Reply

mike rusinack Offline
Junior Member
#3
Do you have the stock frt spindles? if so you can use 2wd ranger rotors / if you have the large rotors you can use mkvii rotors and mk 7 non abs rear axles
Reply

BigNug Offline
Member
#4
Everthing is stock at this point. Does anyone have part numbers for this stuff? Thanks in advance.
Bignug
Reply

Rod K Offline
Senior Member
#5
On the www.northracecars.com website he has everything as a kit. If you call him he will help you. Richard is good to work with. I dealt with him when I built a factory five cobra replica. His parts all work and if you buy his bracket you can use the disc brakes and keep your track width stock.
Rod Kiser, '88TC, 5 speed, 5 lug, Cobra 13" front brakes, Mark VII 11 1/4" rear disc brakes, PiMP'n, Bullit wheels, ATR 3" exhaust, Aluminum driveshaft, EDIS, 60 LB injectors, gutted upper & ported lower. NATO Member
Reply

BigNug Offline
Member
#6
Thanks. Will give them a call.
Bignug
Reply

BigMikeTC Offline
Senior Member
#7
I did mines with parts from a '96 Mustang. Shoot me a e mail and I will tell you how to do it.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB