North American Turbocoupe Organization



5 lug 8.8 axle conversion questions
Hawk Offline
Senior Member
#1
I want to convert my 88 TC to 5 lug axles and stick with disc brakes. Which axles are a direct bolt in, or close to bolt in, that will give me 5 lugs, the same flange to flange width and maintain disc brakes? I know several of you on here have done this. TIA.

Hawk
Reply

darkthunder Offline
Senior Member
#2
You want SN-95 Mustang (94-98) rear axles, calipers, rotors. You can reuse your axle plates if you shim the caliper to center over the rotor. Stock parking brake cables and caliper soft lines bolt right in as SN-95s use the same style Vagra caliper.

I think I have pics on my cardomain or fox but I don't remember.
darkthunder - 85 TC// 302/C4
2009 Subaru WRX//daily driver
Reply

Hawk Offline
Senior Member
#3
Great. Since that is the case, I can also swap the front knuckles and brakes from the same donor car. Thanks for the reply.
Reply

darkthunder Offline
Senior Member
#4
On another note, I thought you were "The Hawk" for the longest time. The owner of this car.

http://www.cardomain.com/ride/209646
darkthunder - 85 TC// 302/C4
2009 Subaru WRX//daily driver
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB