North American Turbocoupe Organization



3rd Bird, but 1st TC
Mikey97D Offline
Senior Member
#1
Hello everyone!

I recently got a '88 Thunderbird Turbo Coupe 5spd and becoming familiar with the car through this forum. I've never had a car with a turbo or blower before so I am new to all the added hardware. It's a pig, but fun to drive.

Many many moons ago I drove a '80 Ford Fairmont that had a 2.3L in it. Between the flex in the chassis and that 2 progressive two barrel carb, I swore off 4 cylinders and the fox chassis. Now look at me now. LOL

I had two 1979 Thunderbirds in my youth.

My focus on this car is to fix a couple problems so it can be a driver again then on to suspension and brakes. I've seen some of the original wheels polished and they look really nice. Not sure if I should bother though if I am planning on upgrading brakes. As of right now the brakes are not too confidence inspiring around town, but I will go through the stock setup first to see if they are at optimum or at least nominal.

First on the list to be fixed is the oil leak behind the cam pulley. I went for the low hanging fruit already to put sealant on the cam bolt,but it still leaks. Then onto the exhaust which it appears Stinger is the last one left making exhaust. His stuff looks nice.

[Image: eKZWine.jpg]





Attached Files Image(s)
   
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.   
Reply

firebirdparts Offline
Member
#2
Hello! I also just bought one, low mileage babied car. I need exhaust but I haven't quite decided what to do with it. I have been enjoying driving it in the not-wintry weather we are having here.
Reply

Mikey97D Offline
Senior Member
#3
firebirdparts Wrote:Hello! I also just bought one, low mileage babied car. I need exhaust but I haven't quite decided what to do with it. I have been enjoying driving it in the not-wintry weather we are having here.
That is a beautiful car you found! looks to be in great shape.
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.   
Reply

andrewjs18 Offline
Administrator
#4
nice looking car. good luck with it!
Reply

Mikey97D Offline
Senior Member
#5
andrewjs18 Wrote:nice looking car. good luck with it!
Thank you! Chasing gremlins in it right now.
1988 TC, 5 spd, Stinger 3" Exhaust, Schneider Roller Cam, -4° Cam Pulley, Cone Filter, Gilles Boost Control Valve set at 17 psi, Walbro 255 lph, CHE Rear Lower and Upper Control Arms, Braided Brake Lines, Hawk HPS 5.0 Front and HPS (F) Rear, CRES Inserts in front calipers, and '93 Cobra Wheels with General 235/50R17 Tires.   
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB