North American Turbocoupe Organization



2004 Mach 1 chin spoiler....
vinnietbird Offline
Senior Member
#1
I installed a Mach 1 chin spolier yesterday.Other than trimming the ends off ( about 6 inches per side)with the Dremmel and cutoff wheel,it fits like it was made for the car.It came with push pins to hold it on,but I chose to drill holes and use nuts/bolts/washers for durability.It wraps from wheelwell to wheelwell.MUCH better than that little plastic strip under there from the factory.The Mach 1 spoiler has a nice forward facing lip that will scoop up air a LOT better,and look cool doing it.I'll try to grab a few pics later.
1988 Thunderbird. No details will be given or spoken of.
Reply

tr_guy79 Offline
Senior Member
#2
PICS PICS PICS....

How much was it? You've got my attention...
3rd Annual Philly Tri-State NATO Meet - http://natomessageboard.com/ultimatebb.p...p=1#000003

'87 - Range Roller 4* adv / 50 trim t04e / Ported E6 / Gutted Knifed intake / Stinger 3->2.5" / Adj. Cam Pulley / Warlboro 255

To Do: PIMP/MS2, FMIC, Bigger Inj
Reply

vinnietbird Offline
Senior Member
#3
I see the spoilers on Ebay all the time.I got mine from Ebay for super cheap ($40 I believe).They usually run about $80 or higher if I remember right.It came in a very large flat box.I've also seen them come rolled up in a package.they weren't designed to be rolled up.I'll post pics tomorrow when I get out to do a little more work.I also just installed my 2004 Bullitt gas lid.It was painted to match the car.Pics of that as well tomorrow.It really does look like it was designed for our cars.I have a TC bumper cover on my Sport,and the spoiler looks great on it.
1988 Thunderbird. No details will be given or spoken of.
Reply

vinnietbird Offline
Senior Member
#4
The Bullitt gas lid is on and looking good.I still need to lower the front end about 2 inches.I'll toss in the springs when I swap out my strut bushings and install the bigger brakes.
1988 Thunderbird. No details will be given or spoken of.
Reply

1988turbo Offline
Member
#5
Vinnie what brakes are you going to use
88 Canyon Red TC, 5.0
83 White TC
Reply

vinnietbird Offline
Senior Member
#6
I'm just upgrading to stock Mustang GT/TC front brakes.The Sport has little dinky 9 inch brakes.Laughable.
1988 Thunderbird. No details will be given or spoken of.
Reply

bang4thebuck Offline
Senior Member
#7
TTT I gota see pics of the air dam installed!
1987 TC 5 speed. To date: AGP 50 trim T3/T4 .63 stage 2 turbo, Ebay bov, 28psi, 255hp pump, Kirban FPR, Ebay Front mount, Full 3 inch Exhaust, Ported Bob's Log, Megasquirt, 55lb. injectors, boport 1.5 cam, boxed lower control arms, Methanol Kit, Ram HD Clutch, front lowered 1/2 inch and E.T. Streets for the track. Best so far 12.5 at 110.8. still tuning.
Reply

TCx2 Offline
Senior Member
#8
It is WELL past tomorrow... (taps foot)
I don't see any pictures!
Kevin
TCx2
67 Green Ford Fairlane 428CJ 5spd
89 Fiji Blue Chrysler Conquest
03 Mercury Marauder "Supercharged"
03 Ford Excursion(King of the SUVs)
04 Mustang Cobra - Screaming Yellow
10 Challenger R/T "Supercharged"
Reply

vinnietbird Offline
Senior Member
#9
How do you post pics here?I post actual pictures on other forums.Let me know.I tried the way I post other pics,but it's not working here.
1988 Thunderbird. No details will be given or spoken of.
Reply

vinnietbird Offline
Senior Member
#10
Never mind,I figured it out.Here are a few pics of the Sport.NOS headlights,door handles,locks (all of them swapped out with NOS Turbo Coupe parts...NICE !!!),NOS 1/4 windows,etc,etc.,etc,etc.I have since painted the trim everywhere but the rear window.It's looking pretty good compared to when I bought it (last pics)...

Mach 1 spoiler...
http://i216.photobucket.com/albums/cc205...0_1047.jpg

Exhaust.....
http://i216.photobucket.com/albums/cc205...0_1051.jpg

Bullitt gas lid (painted body color with black fasteners)...
http://i216.photobucket.com/albums/cc205...0_1043.jpg

2005 Thunderbird emblem.....
http://i216.photobucket.com/albums/cc205...0_1039.jpg

17x9 Cobra R wheels with my own "Vinnietbird" center caps...
http://i216.photobucket.com/albums/cc205...CF9203.jpg

Engine...
http://i216.photobucket.com/albums/cc205...0_0509.jpg

Gauges and interior...
http://i216.photobucket.com/albums/cc205...0_0440.jpg
http://i216.photobucket.com/albums/cc205...0_0949.jpg
http://i216.photobucket.com/albums/cc205...0_0924.jpg

Driving home on a crappy day after the paint job...
http://i216.photobucket.com/albums/cc205...CF9215.jpg

The "Before" pics...
http://i216.photobucket.com/albums/cc205...0_1732.jpg
http://i216.photobucket.com/albums/cc205...0_1729.jpg
http://i216.photobucket.com/albums/cc205...0_1734.jpg
http://i216.photobucket.com/albums/cc205...0_0972.jpg
http://i216.photobucket.com/albums/cc205...0_0974.jpg
http://i216.photobucket.com/albums/cc205...0_0976.jpg
http://i216.photobucket.com/albums/cc205...0_1728.jpg
1988 Thunderbird. No details will be given or spoken of.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB