2 FAST QUESTION HELP PLEASE

whats the difference between a block off flange and a weld flange. which one do i need for a t3 also how is the posi loc i need to lock up the other wheel im tired of one wheel burn outs

I have no idea what your talking about in regards to flanges. Can you give us more info?

I don't know what you are referring to about flanges, but I might be able to help with the one wheel burn outs. It sounds like the clutch discs in your differential have had it. They are fairly easily replaced. You can get a 8.8 clutch disc pack at your Ford parts counter. You might want to pick up a manual on doing this if you haven't before. The kit has 4 discs per side, however you can rebuild your diff with 5 per side if you remove the shims. This creates an even tighter locking situation that you might like. I will try to find the info I used regarding pinion shaft spacing in order to do this performance rebuild safely.

------------------
88 TC
Salvage yard long block doing fine
5-lug / big brake M-2300 kit coming soon
Gillis valve
3" ATR downpipe / 3" single with Dynomax 3" Super Turbo muff
Fuel pump, adj. regulator coming soon
Boost and fuel pressure gauges are now in and functioning on the pillar
Just did the heater core, what a pain!
Want to build an Esslinger aluminum headed V8 eater

Dont buy a clutch kit from the dealer! Check the big Mustang aftermarket supply outfits.... can get the kit from most of them for 1/2 of what you would pay at the dealer.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 02 Taurus Vulcan(wifes car)

a block-off flange is more like a plate ... you would use one to block off the EGR hole in the intake manifold, for example.

A weld flange is something you would use if you were making your own turbo outlet elbow to mount to the non-intercooled T3, or to the end of an exhaust pipe (basically the same as a block-off flange, except it will have a hole in the middle)

------------------
86 TC 3" Exhaust w/ Cat, 17 psi, 1.5" lower, Vovlo intercooler, Saab 900 cooling system
73 Austin Mini 1275