5.0TurboCoupe1988
Joined:
Apr 2008
Broken Arrow, OK
|
|
it seems nobody knows how to remove the timing cover without breaking it. i have two 2.3 turbo engines and both covers are broken...
i've found the part numbers for the replacement inner and outer covers(melling mic-100 and moc-100) but no one seems to be able to get them.
does anyone know where to purchase?
1988 TC 2.3/5-Speed, 148K
|
thumper
Joined:
Jun 2001
Dexter, MO
|
|
Junkyards are a start. Any 2.3 cover would work.
Unfortunately, used parts might break trying to get them out or in as well.
Mine was broken when I did my headgasket. I just didn't bother replacing it! :o
A.K.A. Corey Bennett
1988 TC: white, all options, 5-speed swap, K&N cone filter, "Ranger" roller camshaft, .60/.63 T3, NXS (Gillis-style) Boost Valve, Bosch BOV w/ check valve, Stinger 3" with axle dump (18" glass pack), 95A 3G
Some pictures: http://s639.photobucket.com/albums/uu111/cbennett4041/
|
1988turbotbird
Joined:
Feb 2007
Carlisle, Pennsylvania
|
|
like thumper said, i would check salvage yards for 2.3 rangers and 2.3 mustangs thats where I would start, unless you can still get them from Ford...id go to a local dealer and ask
88 TC/HX35/CAI/3" exhaust/Wilson MS2/Beanman header/Head Work/Laramee Cam/Gillis boost controller/3G alt/Walboro 255 fuel pump/BOV/CHE rear control arms/1" lowered/poly. bushings/Chuck W mounts/6 puck clutch/Pro 5.0 shifter/AEM wideband/Tuning MS..
|
RDOG
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
Quote:Originally posted by 5.0TurboCoupe1988:
it seems nobody knows how to remove the timing cover without breaking it. i have two 2.3 turbo engines and both covers are broken...
i've found the part numbers for the replacement inner and outer covers(melling mic-100 and moc-100) but no one seems to be able to get them.
does anyone know where to purchase?
PM sent.
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
clifford
Joined:
Aug 2007
Dearborn Mi.
|
|
I thought it was just me, guys doing major stuff and I can't get the timing cover off. The bolt by the Tstat is a bear, how is the cam plug removed without damage? No help from the manual. Too embarassed to ask till now.
87TC 5spd. Watson Eng.3"dp-cat. original owner, 38K mi.
|
5.0TurboCoupe1988
Joined:
Apr 2008
Broken Arrow, OK
|
|
i just got a call this morning.....you can get the replacement covers through northern auto parts. $62 for both inner and outer. it is special order and takes about a week to get to your door.
thanks for the offer, RDOG....i'm going to go ahead and get the new ones...
1988 TC 2.3/5-Speed, 148K
|
RDOG
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
Quote:Originally posted by clifford:
I thought it was just me, guys doing major stuff and I can't get the timing cover off. The bolt by the Tstat is a bear, how is the cam plug removed without damage? No help from the manual. Too embarassed to ask till now.
The best tools I ever bought were the craftsman box wrenches that are ratchet style with the CW CCW flip swith so you dont have to remove it of the bolt. I luve those tools. Anyway I use it to get the hard to reach bolt by the thermostat. Those tools have paid for themselves time and time again.
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
RDOG
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
|