| #21 |
Yes. As part of the test, the ECM closes the IAC. If the base idle is not set high enough, when the IAC closes, the car will stall.
Also, check to see if the wiring for the ignition module wiring is grounding out against the lower intake. This can cause an intermittent miss
-Shane
Also, check to see if the wiring for the ignition module wiring is grounding out against the lower intake. This can cause an intermittent miss
-Shane
3rd Annual Philly Tri-State NATO Meet - http://natomessageboard.com/ultimatebb.p...p=1#000003
'87 - Range Roller 4* adv / 50 trim t04e / Ported E6 / Gutted Knifed intake / Stinger 3->2.5" / Adj. Cam Pulley / Warlboro 255
To Do: PIMP/MS2, FMIC, Bigger Inj
'87 - Range Roller 4* adv / 50 trim t04e / Ported E6 / Gutted Knifed intake / Stinger 3->2.5" / Adj. Cam Pulley / Warlboro 255
To Do: PIMP/MS2, FMIC, Bigger Inj