North American Turbocoupe Organization



Steering "Rag Joint" part #
lonstar7 Offline
Posting Freak
#1
I'm trying to find the correct part number part for the steering shaft coupler, "rag joint" on my 1988 TC. I've come up with EOSZ3A525A, but I'm not sure if this is the right part. Several places on line stock it but they don't show any photos of it that I can compare to the one in the car. Anyone know if this is the right part number?
Lonestar7

1988 Black/Red TC, 5 Speed, 92,400miles (on 4/14/2012). KYB Shocks And Struts, 140MPH Speedo, CHE Rear Control Arms, Otherwise Stock.

2005 Volkswagon Golf GLS 1.9L TDI Turbo Diesel, 5 Speed Manual, InMotion Stage II Chip Tuning

1998 Dodge Ram 2500 4X4, 5.9L Cummings Turbo Diesel, 5 Speed Manual

1988 Firebird Formula 350, 350ci Tuned Port Injection, 700R4 Auto
Reply

Pete D Offline
Administrator
#2
This came from a listing that a former member compliled using a "crash guide" I have the same guide somewhere in my literature, it is several years old so take the price with a grain of salt Big Grin
:
E0SZ-3A525-A Coupling.shaft $11.63
Pete Dunham


Reply

etc1006 Offline
Member
#3
I got mine out of the HELP section at AZ. 31005. It's for my 93 Mustang. But I compared it to an old TC steering column I had and it was the same. IIRC you need to drill out 2 of the holes in the rubber a bit bigger for the shoulder bolts.
-Eric
Reply

The Shredder Offline
Member
#4
I have a used 91 Mustang rag joint I can send you for the cost of Shipping and PayPal 3%

Thanks!
88TC blue/blue, auto, loaded except leather, bone stock, 127K mi. - back in the TC game!
88TC white, converted 5 spd, K&N filter, Manual Gillis BV, 189K mi. SOLD :-(
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB