SHOcoupe
Joined:
Aug 2009
New Jersey
|
|
Been having this issue since I bought my TC over a year ago, never really thought much about it until now. It's winter, and I don't want this to be something that kills me or leaves me stranded in the cold...
My steering wheel whobbles in every direction (up.down.left.right). It works perfectly fine, there is no play in the actual steering, just in the wheel itself when you press on it.
Anyone else have this problem, common fix?
88 TC, FMIC, GT35-1 .70 A/R, 42lb Injectors, MS2 p&p, Custom upper manifold, junk heap Stinger header, 3 inch exhaust, Accufab FPR, Bo-Port 1.9 cam, Oversized valves, ported head, Stage 3 clutch, 22psi.
|
HCOR
Joined:
Jul 2009
FOREST HILL MD
|
|
xcheck to see if the tilt bolts are loose. i f I remember correctly they are 13mm, if you pull the covers off you should be able to see it clearly what is loose.
only memories
|
vinnietbird
Joined:
Jun 2007
Oklahoma
|
|
As Hcor said,pull the steering column covers, and I think you have to remove the signal stalk as well and behind that,there are,as Hcor stated,two bolts that need some Loctite and tightening.
1988 Thunderbird. No details will be given or spoken of.
|
Robert Camp
Joined:
Jan 2006
Raleigh, NC
|
|
Without doubt that's it. Mine did the same until I went under the covers and tightened those two fasteners and then it was solid. Like said you have to remove the switch assembly on the left side.
Robert Camp
'86 Medium Regatta Blue TC, 5-speed, original owner.
|
Kev
Joined:
Apr 2001
Harrison Arkansas
|
|
|
Kev
Posting Freak
|
Yep, mine used to be loose too. It seems like the bolts were torx heads? It's been a few years, and I'm not sure why I think that, it just seems right. Tightened my steering wheel right up with those little bolts. Go for it!!
Kev
1988 TC 5spd
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
I also seem to remember they are Torx bolts.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
57fan
Joined:
Aug 2005
Olympia Wa.
|
|
Seems like we all had the loose steering wheel issue at one time or another. Definitely use Lock-tite on the screws...
87 Turbo, 5 spd, full loaded with sun roof.
|
vinnietbird
Joined:
Jun 2007
Oklahoma
|
|
Mine were not Torx. I THINK they were 13mm.
1988 Thunderbird. No details will be given or spoken of.
|