North American Turbocoupe Organization



What do you use for releasing the belt tension
wwwtbirdforumcom Offline
Senior Member
#1
Is there a special tool for this chore??? What does it look like -

------------------
NATO Paying Member
Here is my 1987 TC, Mean look - Glad to be here...
[email protected]
Here is a pic of my baby
NATO Member
Here is my 1987 TC, Mean look - Glad to be here...
[email protected]
[Image: Cumberland.gif]
Reply

Pete D Offline
Administrator
#2
Crowbar - a big one.

------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS. Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham


Reply

Birdman78758 Offline
Senior Member
#3
Just put a socket on it with the longest ratchet you've got and pull (hard).
Reply

Dan E Offline
Posting Freak
#4
Maybe need to clarify something here...

Do you mean the Serpentine belt, AC belt or the timing belt ?
Dan Eaves
88TC 5spd Vermillion Red, Polished...everything...
Reply

wwwtbirdforumcom Offline
Senior Member
#5
any of them - they all seem to have the same sort of swivel mechanism.

------------------
NATO Paying Member
Here is my 1987 TC, Mean look - Glad to be here...
[email protected]
Here is a pic of my baby
NATO Member
Here is my 1987 TC, Mean look - Glad to be here...
[email protected]
[Image: Cumberland.gif]
Reply

Jeff K Offline
Administrator
#6
A/C and alt / PS tensioners: Breaker bar with a socket on the nut. If I remember correctly, it is 15 mm.

Timing belt: Loosen the locking bolt (one in teh curved slot) a few turns, and loosen the pivot bolt (one on the rotating axis) about 1/2 turn. Use pry bar.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB