North American Turbocoupe Organization



jetcoat ?
thunderbird234 Offline
Banned
#1
how does the volvo front mount look and what kind of mounts are required. also who does jet coating on exhaust of turbos. i do not think anything else will work its to hot. also im looking for bigger injectors and 255fuel pump used later!!!!!
Reply

Jeff K Offline
Administrator
#2
If you are going to use bigger injectors, I assume you are planning on running an aftermarket EFI system, EEC tuner, etc.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

BCA Offline
Senior Member
#3
Turbonetics offers a ceramic coating option on their turbochargers, maybe contact them to see if they will coat it for you.
www.turboneticsinc.com

Brent
1985 Cougar XR-7 5-speed - 1 of 1,246 built
1971 Ranchero GT
Hi-Jumper SSIII w/2.3L Turbo power
Reply





Users browsing this thread:
2 Guest(s)



Theme © iAndrew 2018 - Software MyBB