North American Turbocoupe Organization



jetcoat ?
thunderbird234 Offline
Banned
#1
how does the volvo front mount look and what kind of mounts are required. also who does jet coating on exhaust of turbos. i do not think anything else will work its to hot. also im looking for bigger injectors and 255fuel pump used later!!!!!
Reply

Jeff K Offline
Administrator
#2
If you are going to use bigger injectors, I assume you are planning on running an aftermarket EFI system, EEC tuner, etc.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
05 Taurus SEL Duratec daily driver
04 Taurus Duratec (wifes car)
02 Pontiac Grand Prix GT
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

BCA Offline
Senior Member
#3
Turbonetics offers a ceramic coating option on their turbochargers, maybe contact them to see if they will coat it for you.
www.turboneticsinc.com

Brent
1985 Cougar XR-7 5-speed - 1 of 1,246 built
1971 Ranchero GT
Hi-Jumper SSIII w/2.3L Turbo power
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB