North American Turbocoupe Organization



water injection
nirvana Offline
Junior Member
#1
Anybody out there built a water injection system ? I need to know what parts you used and from what.I can't afford 500.00 for a Spearco or Aquamist
Reply

Jeff K Offline
Administrator
#2
Are you a NATO member? The next NATO Newsletter (available to members only),which is due out shortly, will have a complete write up, including pics, of my home made water injection system made using JY parts and parts that can be had new for just a few $$. My total cost to build was about $30. Total time I spent developing and testing was probably over 100 hours.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB